Stihl FS 310 Instruction Manual page 29

Toolless filler cap (with folding grip)
Threaded filler cap
Opening the toolless filler cap
Swing the grip into an upright
N
position.
FS 310
Turn the cap counterclockwise
N
(approx. 1/4 turn).
Remove the filler cap.
N
Refueling
Take care not to spill fuel while fueling,
and do not overfill the tank.
Closing the toolless filler cap
Position the cap with the grip in an
N
upright position; the raised
positioning marks must line up.
Turn cap clockwise as far as it will
N
go (approx. 1/4 turn).
Fold the grip down so that it is flush
N
with the surface.
If the grip is not flush with the surface
and the lug on the clip does not engage
entirely in the recess (arrow), the cap is
not properly closed and the steps
described above must be repeated. See
also the "Toolless cap with grip" section
in the Safety Precautions.
Opening the threaded filler cap
Turn the cap counterclockwise until
N
it can be removed from the tank
opening.
Remove the filler cap.
N
Refueling
Take care not to spill fuel while fueling
and do not overfill the tank.
English
27