Stihl FS 310 Instruction Manual page 20

English
Approved Combinations
Select correct combination from the
table according to the cutting
attachment you intend to use.
WARNING
For safety reasons only the cutting
attachments and deflectors or limit stops
shown in each row of the table may be
used together. No other combinations
are permitted – risk of accidents.
Cutting Attachments
Mowing heads
1 STIHL SuperCut 40-2
2 STIHL AutoCut 40-2
3 STIHL TrimCut 40-2
4 STIHL TrimCut 41-2
5 STIHL DuroCut 40-4
6 STIHL PolyCut 40-3
Metal cutting attachments
7 Grass cutting blade 230-4
(Ø 230 mm)
8 Grass cutting blade 255-8
(Ø 255 mm)
9 Brush knife 300-3
(Ø 300 mm)
10 Scratcher tooth circular saw blade
200
(Ø 200 mm)
11 Chisel tooth circular saw blade 200
(Ø 200 mm)
18
WARNING
Non-metal grass cutting blades, brush
knives and circular saw blades are not
approved.
Deflectors, Limit Stop
12 Deflector for mowing heads
13 Deflector with
14 Skirt and blade for mowing heads
15 Deflector without Deflector with skirt
and blade for metal cutting
attachments 7 to 9
16 Limit stop for circular saw blades
Harnesses
17 Full harness must be used
18 Full "deluxe" harness must be used
WARNING
Based on the cutting attachment being
used:
Choose the proper deflector in order to
reduce the risk of injury from thrown
objects and contact with the cutting
attachment.
Make sure your unit is equipped with the
proper handle and harness in order to
reduce the risk of injury from loss of
control and contact with the cutting
attachment.
Use grass cutting metal blades and
brush knives on this unit only if equipped
with a bike handle or a loop handle with
barrier bar.
Use circular saw blades on this unit only
if equipped with a bike handle.
Do not use rigid plastic blades on this
unit.
FS 310