Related Manuals for NewAir AF-1000 Series
Summary of Contents for NewAir AF-1000 Series
- Page 1 AF-1000 Series Evaporative Cooler OWNERS MANUAL Read and save these instructions.
- Page 2 Count on NewAir. As a proud NewAir owner, welcome to our family. There are no robots here, real people shipped your product and real people are here to help you.
-
Page 3: Table Of Contents
EAD AND SAVE THESE INSTRUCTIONS TABLE OF CONTENTS Introduction ......................3 Safety Information & Warnings ................4 Parts List ....................... 5 Use & Operation ....................6 Installing casters ....................7 Cleaning & Maintenance ..................7 Troubleshooting ....................8 Limited Manufacturer’s Warranty ............... 9 SPECIFICATIONS AF-1000 ODEL... -
Page 4: Safety Information & Warnings
SAFETY INFORMATION & WARNINGS When using any electrical appliance, basic safety precautions must be followed in order to reduce the risk of fire, electrical shock and/or injury to persons or property. Be sure to read all instructions before using this appliance and observe the following safety tips: ... -
Page 5: Parts List
PARTS LIST 1. Control Panel 8. Dust Filter & Rear 2. Air Louvers Screen 3. Carrying Handles 9. Water Level Indicator 4. Cord Wrap 10. Casters 5. Honeycomb Filter 11. Water Tank 6. Partition 12. Drain Hole 7. Carbon Filter 13. -
Page 6: Use & Operation
USE & OPERATION 1. POWER: Connect the cord to a power outlet. An indicator light will turn on, indicating that the power source is connected. Press the “On/Speed” button to turn the unit on. When it turns on, the cooler will start at medium speed (number 2) and then drop to the low speed setting (number 1) after a few seconds. -
Page 7: Installing Casters
INSTALLING CASTERS 1. Make sure the unit is not connected to a power outlet. 2. Place the unit on a soft mat on the floor. Gently turn the unit upside down and install the casters to the corresponding slots. Install screws tightly. -
Page 8: Troubleshooting
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE(S) POSSIBLE SOLUTION The power cord is not Check to make sure the There is no plugged in. plug is plugged into an airflow. outlet. The unit should beep twice once the power supply is connected. b. Make sure the water b. -
Page 9: Limited Manufacturer's Warranty
When making a warranty claim, please have the original bill of purchase with purchase date available. Once confirmed that your appliance is eligible for warranty service, all repairs will be performed by a NewAir™ authorized repair facility. The purchaser will be responsible for any removal or transportation costs.