Weil-McLain Evergreen 220 User's Information Manual page 11

™
gas
The Evergreen control display
Figure 8
boiler control display USER Menu — (set date and time, reset faults).
Evergreen
TM
BOILER STATUS screen
Figure 7
Evergreen boiler control display LOCKOUT SCREEN — screen turns red when boiler locks out —
TM
highlight and select MANUAL RESET to reset boiler as shown below.
Resetting faults:
1. During a fault, the status will change to LOCKOUT and the
Time & Date line will alternate with the fault name. The line
MANUAL RESET will appear on the Homeowner screen.
2. Select MANUAL RESET to reset fault condition.
Part number 550-100-132/0715
-
fired water boiler
— User's Information Manual
(continued)
3. The MANUAL RESET screen will indicate whether the fault
was a manual or automatic reset, the fault name, and the time
and date it occurred.
4. Call for service if fault continues.
Date and time
1. Set month, date, year, hour and
minutes.
2. Keeping the date and time current
makes sure the control can record
problems accurately.
11