Page 1
User Manual Manuel de l’utilisateur Guía del usuario 32MF338B LCD TV Quick Use Guide Inside! Guide d’usage Rapide Incluse! Guía de Uso Rápido Incluida! For Customer Use / À l’usage du client / Para Uso del Cliente Model/Modle/ModeloNo. : Serial/Srie/Serie No.
Page 2
Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below, so don’t miss out. Complete and return your Product Registration Card at once, or register online at www.magnavox.com/usasupport to ensure:...
NTRODUCTION IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Page 4
NTRODUCTION Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death. FCC WARNING This apparatus may generate or use radio frequency energy.
Supplied Accessories user manual registration card (1EMN24119) (1VMN23233A) • If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free customer support line found on the cover of this manual. •...
Buttons on the Remote Control Installing the Batteries Install the batteries (AAA x 2) matching the polarity indicated inside battery compartment of the remote control. Battery Precautions: • Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device. •...
NTRODUCTION Control Panel Rear Panel DIGITAL VIDEO 1 AUDIO OUT (COAXIAL) S-VIDEO PC-IN AUDIO HDMI-IN AUDIO 1. y POWER (p14) Press to turn the TV on and off. side of this TV 2. SOURCE (p18) • • 3. CHANNEL Press to select channels or move up/down through the main menu items.
REPARATION Cables not included. Please purchase the necessary cables at your local store. Basic Connection This section describes how to connect the unit to an antenna, cable receiver or satellite box. Note: • Be sure your antenna or other device is connected properly before plugging in the AC power cord. [Antenna Connection] Connect the RF coaxial cable on your home outlet to the antenna input jack of this TV.
REPARATION Cables not included. Please purchase the necessary cables at your local store. External Device Connection [HDMI Connection] HDMI (High-Definition Multimedia Interface) transports high definition video and multi-channel digital audio through a single cable. It ensures that the content sent from the source to the TV is of the highest possible resolution. Use an HDMI cable to connect the TV to external video devices equipped with HDMI output jack.
Page 11
Cables not included. Please purchase the necessary cables at your local store. [Component Video Connection] Component video connection offers better picture quality for video devices connected to the TV. Use a component video cable to connect the TV to external video devices equipped with component video output jacks.
Page 12
REPARATION Cables not included. Please purchase the necessary cables at your local store. [Video in Connection] It offers standard picture quality for video devices connected to the TV. Use an video cable to connect the TV to external video devices equipped with video output jack. If you connect to the TV’s VIDEO1 or VIDEO2 video input jack, connect an audio cable to the audio L/R jacks of VIDEO 1 or VIDEO 2 accordingly.
Page 13
Cables not included. Please purchase the necessary cables at your local store. [PC Connection] This TV is equipped with a PC input jack. If you connect this TV to your PC, you can use this TV as a computer monitor. e.g.) VGA cable should be with ferrite core.
NITIAL SETTING These operations are accessible by remote control. Some may also be accessible by controls on the main TV. Initial Setup This section will guide you through the TV’s initial setting which includes selecting a language for your on-screen menu and autoprogram, which automatically scans and memorizes viewable channels.
Main Menu This section describes the overview of the main menu displayed when you press [MENU]. For more details, see the reference page for each item. The main menu consists of the function setting items below. Press [MENU]. EXIT PICTURE SOUND SETUP FEATURES...
NITIAL SETTING Note: • After setting “Autoprogram”, using [CH. remote control skips unavailable programs automatically. • If you connect the cable system directly, contact the CATV installer. • If you press [POWER y y ] or [MENU] during autoprogram, the setting will be canceled. •...
ATCHING TV Channel Selection Select channels by pressing [CH. ] or [the Number buttons]. • To select the memorized channels, use [CH. [the Number buttons]. • To select the non-memorized channels, use [the Number buttons]. To Use [the Number buttons] When selecting Analog Channel 12 When selecting digital channel 12-1 Be sure to press [–] before entering the Minor...
ATCHING TV Still Mode You can pause the image shown on the TV screen. Press [FREEZE] to pause the image shown on the TV screen. • The sound output will not be paused. • If no signal is detected or protected signal is received during still mode, the image remains paused and the sound output will be muted.
Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. In the analog mode, the current channel number and the audio mode are displayed. Press [INFO]. / STEREO 480i 480i TV-PG DLSV •...
ATCHING TV TV Screen Display Mode 4 types of display modes can be selected when the broadcasting station is sending 4:3 or 16:9 video signal. And 3 types of display modes can be selected for PC input signal. Press [FORMAT] repeatedly to switch the TV aspect ratio.
PTIONAL SETTING Channel List The channel list function lets you remove undesired channels from the channel registration list. Press [MENU] to display the main menu. Use [Cursor K / L] to select “SETUP”, then press [OK]. EXIT PICTURE SOUND SETUP FEATURES LANGUAGE Use [Cursor K / L] to select “Channel List”, then press...
PTIONAL SETTING Antenna Confirmation This function lets you check the digital signal strength of each channel. Press [MENU] to display the main menu. Use [Cursor K / L] to select “SETUP”, then press [OK]. EXIT PICTURE SOUND SETUP FEATURES LANGUAGE Use [Cursor K / L] to select “Antenna”, then press [OK].
Picture Adjustment You can adjust brightness, contrast, color, tint and sharpness. Press [MENU] to display the main menu. Use [Cursor K / L] to select “PICTURE”, then press [OK]. EXIT PICTURE SOUND SETUP FEATURES LANGUAGE Use [Cursor K / L] to select the item you want to adjust, then press [OK].
PTIONAL SETTING Sound Adjustment You can adjust treble and bass. Press [MENU] to display the main menu. Use [Cursor K / L] to select “SOUND”, then press [OK]. EXIT PICTURE SOUND SETUP FEATURES LANGUAGE Use [Cursor K / L] to select the sound type you want to adjust, then press [OK].
Closed Caption You can view closed captioning (cc) for TV programs, movies and news. Closed caption refer to text of dialogue or descriptions displayed on-screen for the hearing impaired. Press [MENU] to display the main menu. Use [Cursor K / L] to select “FEATURES”, then press [OK].
PTIONAL SETTING DTV Closed Caption In addition to the basic closed caption described on page 25, DTV has its own closed caption called DTV CC. Use this menu to change the settings for DTV CC. Press [MENU] to display the main menu. Use [Cursor K / L] to select “FEATURES”, then press [OK].
CC Style You can change the CC style such as font, color or size, etc. Press [MENU] to display the main menu. Use [Cursor K / L] to select “FEATURES”, then press [OK]. EXIT PICTURE SOUND SETUP FEATURES LANGUAGE Use [Cursor K / L] to select “Closed Caption”, then press [OK].
Page 28
PTIONAL SETTING Font Color Font color of the displayed caption can be switched as below. EXIT PICTURE SOUND SETUP FEATURES LANGUAGE Font Opacity Font opacity of the displayed caption can be switched as below. EXIT PICTURE SOUND SETUP FEATURES LANGUAGE Back Color Background color of the displayed caption can be switched as below.
Parental Control Parental control reads the ratings for programs, then denies access to the programs which exceed the rating level you set. With this function, you can block certain programming inappropriate for children. Press [MENU] to display the main menu. Use [Cursor K / L] to select “FEATURES”, then press [OK].
Page 30
PTIONAL SETTING A. US Movie ratings lock A. US Movie ratings lock US Movie ratings lock is the rating system created by MPAA (Motion Picture Association of America). Use [Cursor K / L] to select “US Movie ratings lock”, then press [OK]. EXIT PICTURE SOUND...
Page 31
Rating Category TV-MA Mature audience only TV-14 Unsuitable for children under 14 TV-PG Parental guidance suggested TV-G General audience Appropriate for all children 7 and TV-Y7 older TV-Y Appropriate for all children Sub Rating Category Fantasy Violence Violence Sexual Situation Coarse Language Suggestive Dialogue Note:...
PTIONAL SETTING PC Settings This function lets you adjust the PC screen position, clock and phase during PC input. Press [MENU] to display the main menu. Use [Cursor K / L] to select “FEATURES”, then press [OK]. EXIT PICTURE SOUND SETUP FEATURES LANGUAGE...
HDMI Audio You can set the method of sound input for the HDMI1 input jack. Press [MENU] to display the main menu. Use [Cursor K / L] to select “FEATURES”, then press [OK]. EXIT PICTURE SOUND SETUP FEATURES LANGUAGE Use [Cursor K / L] to select “HDMI1 Audio Source”, then press [OK].
ROUBLESHOOTING Troubleshooting Guide If the TV does not perform properly when operated as instructed in this User Manual, check the following chart and all connections once before calling for service. Symptom No power No picture or sound No color Sound OK, picture poor Ghosts,lines or streaks in picture Different color marks on TV...
Question My remote control does not work. What should I do? How come the Initial setup appears every time I turn on this TV? Why I cannot watch some of TV programs? How come there is no image from the connected external devices? Whenever I entered channel number, it changes automatically.
NFORMATION Glossary ATSC Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards. Aspect Ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square);...
NINETY (90) DAY LABOR / ONE (1) YEAR PARTS WARRANTY COVERAGE: This warranty obligation is limited to the terms as set forth below. WHO IS COVERED: This product warranty is issued to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (“Warranty Period”) from an Authorized Dealer.