Reconnect A Headset Or Car Kit; Disconnect From A Bluetooth Device; Send Information Using Bluetooth - HTC Desire 626s User Manual

Note: If automatic pairing fails, enter the passcode supplied with your headset.
The pairing and connection status is displayed below the hands-free headset or car kit name in the
Bluetooth phones section. When the Bluetooth headset or car kit is connected to your phone, the
Bluetooth connected icon

Reconnect a Headset or Car Kit

Normally, you can easily reconnect your headset by switching on Bluetooth on your phone, and then
turning on the headset. However, you might have to connect manually if your headset has been
used with another Bluetooth device.
Important: Make sure that the headset is discoverable. Refer to the headset manual for details.
1. With two fingers, swipe down from the status bar to open Quick Settings.
2. Tap the BLUETOOTH tile to turn Bluetooth on.
3. Tap below the BLUETOOTH tile to open the Bluetooth screen.
4. Tap the headset's name in the Paired Devices section.
5. If prompted to enter a passcode, try 0000 or 1234, or consult the headset/car kit documentation
to find the passcode.
If you still cannot reconnect to the headset or car kit, follow the instructions in Disconnect From a
Bluetooth Device, and then follow the steps in Connect a Bluetooth Headset or Car Kit.

Disconnect From a Bluetooth Device

If you do not need to use Bluetooth at any given point, you can disconnect and unpair your phone
from a Bluetooth device.
1. With two fingers, swipe down from the status bar to open Quick Settings.
2. Tap the BLUETOOTH tile to turn Bluetooth on.
3. Tap below the BLUETOOTH tile to open the Bluetooth screen.
4. In the Paired Devices section, tap
5. Tap Unpair.
Note: Tap the name of the device to reconnect it.

Send Information Using Bluetooth

You can use Bluetooth to transfer information between your phone and another Bluetooth-enabled
device such as a phone or computer. The first time you transfer information between your phone and
another phone, you need to enter or confirm a security passcode. After that, your phone and the
Connectivity
is displayed in the status bar.
next to the device to unpair.
195