Reconnect A Headset Or Car Kit; Disconnect From A Bluetooth Device; Send Information Using Bluetooth - HTC Desire 510 User Manual

Hide thumbs Also See for Desire 510:
Table of Contents

Advertisement

The pairing and connection status is displayed below the hands-free headset or car kit name in the 
Bluetooth phones section. When the Bluetooth headset or car kit is connected to your phone, the 
Bluetooth connected icon 

Reconnect a Headset or Car Kit

Normally, you can easily reconnect your headset by switching on Bluetooth on your phone, and then 
turning on the headset. However, you might have to connect manually if your headset has been 
used with another Bluetooth device.
Important: Make sure that the headset is discoverable. Refer to the headset manual for details.
 1.  With two fingers, swipe down from the status bar to open Quick Settings.
 2.  Touch the BLUETOOTH tile to turn Bluetooth on.
 3.  Touch 
 below the BLUETOOTH tile to open the Bluetooth screen.
 4.  Touch the headset's name in the Paired Devices section.
 5.  If prompted to enter a passcode, try 0000 or 1234, or consult the headset/car kit documentation 
to find the passcode.
If you still cannot reconnect to the headset or car kit, follow the instructions in Disconnect From a 
Bluetooth Device, and then follow the steps in Connect a Bluetooth Headset or Car Kit.

Disconnect From a Bluetooth Device

If you do not need to use Bluetooth at any given point, you can disconnect and unpair your phone 
from a Bluetooth device.
 1.  With two fingers, swipe down from the status bar to open Quick Settings.
 2.  Touch the BLUETOOTH tile to turn Bluetooth on.
 3.  Touch 
 below the BLUETOOTH tile to open the Bluetooth screen.
 4.  In the Paired Devices section, touch 
 5.  Touch Unpair.
Note: Touch the name of the device to reconnect it.

Send Information Using Bluetooth

You can use Bluetooth to transfer information between your phone and another Bluetooth-enabled 
device such as a phone or notebook computer. The first time you transfer information between your 
phone and another phone, you need to enter or confirm a security passcode. After that, your phone 
and the other phone are paired, and you will not need to exchange passcodes to transfer information 
in the future.
 Tools and Calendar
 is displayed in the status bar. 
 next to the device to unpair.
153

Advertisement

Table of Contents
loading

Table of Contents