Viewing The Menus; Memorizing The Channels - Samsung HL-T5055W Owner's Instructions Manual

Hide thumbs Also See for HL-T5055W:
Table of Contents

Advertisement

Viewing the Menus
2
3
With the power on, press the MENU button.
The main menu appears on the screen. Its left side has five icons:
Picture, Sound, Channel, Setup, input.
Use the A or V button to select one of the five icons.
Then press the ENTER button to access the icon's sub-menu.
Press the EXIT button to exit.
_- It takes about one minute until the on-screen menu disappears.
Memorizing the Channels
..... V
.......
......
Your TV can memorize and store all of the available channels for both "off-air" (air) and cable channels. After the available
channels are memorized, use the CH _X and CH V button to scan through the channels. This eliminates the need to change
channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source,
memorizing the channels (automatic) and adding or deleting channels (manual).
Selecting_ the Video Signal-source
Before your television can begin memorizing the available channels, you rnust specify the type of signal source that is connected to the
TV(i.e. an air or a cable system).
1
Press the MENU button to display the menu.
Press the ,A or T button to select Channel, then press the ENTER button.
2
Pressthe ENTER button select Antenna.
Press the ,A or T button to select Air or Cable, then press the ENTER button.
Press the MENU button.
Channels
in Memory=_(Automatic Method}_
1
Press the MENU button to display the menu.
Press the A or V button to select Channel, then press the ENTER button.
2
Press the ,A or V button to select Auto Program, then press the ENTER button.
Press the A or T button to select the antenna connection, then press the ENTER button.
Air :"Air" antenna signal.
Cable :"Cable" antenna signal.
Air+Cable :"Air" and "Cable" antenna signals.
If the antenna is connected toANT 1 IN(CABLE), select Cable and if it is connected to
ANT 2 IN(AIR), select Air.
If both ANT I IN and ANT 2 IN are connected, select the Air + Cable.
If you selected Air, then go to step 5.
Continued...

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hl-t5655w

Table of Contents