Hide thumbs Also See for HL-T6176S:
Table of Contents

Advertisement

Available languages

Available languages

DLP TV
Register your product at www.samsung.com/global/register
Record your Model and Serial number here for future reference.
▪ Model _______________ ▪ Serial No. _______________
Owner's Instructions
HL-T5076S
HL-T5676S
HL-T6176S

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for Samsung HL-T6176S

  • Page 1 DLP TV Owner’s Instructions HL-T5076S HL-T5676S HL-T6176S Register your product at www.samsung.com/global/register Record your Model and Serial number here for future reference. ▪ Model _______________ ▪ Serial No. _______________...
  • Page 2: A Guide To Digital Tv

    ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3. © 2007 Samsung Electronics Co., Ltd. All rights reserved. English - 2...
  • Page 3 Q&A 1. Is the antenna I use for existing TV reception good enough for DTV? Over-the-air (OTA) digital TV broadcasting uses the same channels as analog TV and works well with many existing TV antennas. However, DTV broadcast channel assignments are different than analog channels. You should find out whether your local DTV broadcasts are on VHF (channels 2-13) or UHF (channels 14-69) to see if you need a different antenna.
  • Page 4: Table Of Contents

    Contents GENERAL INFORMATION CHANNEL CONTROL ■ Viewing Position ............5 ■ Clearing Scrambled Channels - Digital ....38 ■ List of Features ............5 ■ Adding and Erasing Channels ........ 38 ■ Checking Parts ............6 ■ Setting Your Favorite Channels ......39 ■...
  • Page 5: General Information

    General Information Viewing Position To optimize your viewing comfort, please follow the guidelines below for viewing distance. If viewing for an extended period of time, sit as far back from the screen as possible. < Top view> < Side view> 50˝...
  • Page 6: Checking Parts

    Checking Parts Owner’s Instructions Remote Control Warranty Card/ Power Cord Cloth-Clean Registration Card/ (BP59-00125A)/ (3903-000144A) Safety Guide Manual/ AAA Batteries Quick Guide Manual Sold Separately S-Video Cable Video Cable Antenna Cable Component Cables Audio Cables Replacement Lamp For purchasing a replacement D-Sub Cable PC Audio Cable HDMI/DVI Cable...
  • Page 7: Indicator Lights

    1 SOURCE (ENTER) Toggles between all the available input sources Press to confirm a selection. (TV, AV1, AV2, S-Video1, S-Video2, Component1, 6 POWER Component2, PC, HDMI1, HDMI2, or HDMI3/DVI). Press to turn the TV on and off. 2 MENU 7 Remote Control Sensor Press to see an on-screen menu of your TV’s features.
  • Page 8: Viewing The Connection Panel

    Viewing the Connection Panel Side Panel Jacks Use the side panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players. For more information on connecting equipment, see pages 10~16. 1 ANT 1 IN (CABLE)/ANT 2 IN (AIR) 75Ω...
  • Page 9: Remote Control

    Remote Control You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player, or Set-Top Box. 1 POWER ) PRE-CH Turns the TV on and off.
  • Page 10: Installing Batteries In The Remote Control

    Installing Batteries in the Remote Control Lift the cover at the back of the remote control upward as shown in the figure. Install two AAA size batteries. ➢ ● Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.
  • Page 11: Connecting Cable Tv

    Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box Plug the incoming cable into the ANT 1 IN (CABLE) terminal on the side of the TV. ➢ Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.
  • Page 12: Connecting A Vcr

    Each VCR has a different side panel configuration. ➢ When connecting a VCR, match the color of the connection terminal to the cable. S-Video Connection Your Samsung TV can be connected TV Side Panel to the S-Video jack of a VCR. (This connection delivers a better picture when compared to the regular video connection above.)
  • Page 13: Connecting A Camcorder

    Connecting a Camcorder The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR Connect a Video Cable or TV Side Panel Camcorder S-Video Cable between the AV IN 1 [VIDEO] or [S-VIDEO] (or AV...
  • Page 14: Connecting A Dvd Player/Set-Top Box Via Hdmi

    Connecting a DVD Player/Set-Top Box via HDMI This connection can only be made if there is an HDMI Output jack on the external device. Connect an HDMI Cable between TV Side Panel the HDMI IN 1 (or HDMI IN 2) on the TV and the HDMI OUT jack on DVD Player/ the DVD Player/Set-Top Box.
  • Page 15: Connecting A Digital Audio System

    Connecting a Digital Audio System The side panel jacks on your TV make it easy to connect a Digital Audio System to your TV. Connect an Optical Cable TV Side Panel between the DIGITAL AUDIO OUT (OPTICAL) jack on the TV and the Digital Audio Input jack on the Digital Audio System.
  • Page 16: Connecting A Pc

    Connecting a PC Using the D-Sub Cable Using the D-Sub Cable Connect a D-Sub Cable between TV Side Panel the PC IN [PC] jack on the TV and the PC output jack on your computer. Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your...
  • Page 17: Plug & Play Feature

    Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically and subsequently: Press the POWER button on the remote control. Plug & Play The message Menu language, Shop Mode, Channels and Time will be set. is Menu language, Shop Mode, Channels and Time automatically displayed.
  • Page 18: Changing Channels

    Setting the Clock Automatically Press the ◄ or ► button to select Off or On, then the ENTER button. The message Select the time zone in which you live. is displayed. 10 Press the ▲ or ▼ button to highlight the time zone for your local area (and to move the highlight to the appropriate time zone on the map of the United States).
  • Page 19: Adjusting The Volume

    Adjusting the Volume Press the VOL + or VOL – button to increase or decrease the volume. Using the Mute Button At any time, you can cut off the sound using the MUTE button. Press the MUTE button and the sound cuts off. The word Mute is displayed on the screen.
  • Page 20: Navigating Menus By Using The Menu Map

    Navigating Menus by Using the Menu Map Using the Menu Map of the main menu enables you to view all menus and select a function quickly. You can select any menu by using the menu map. Press the MENU button. Menu Map The main menu will appear at the bottom of the Mode...
  • Page 21: Setting Up Your Remote Control

    Storing Channels in Memory (Automatic Method) Press the ▲ or ▼ button to select Auto Program, then press the ENTER button. Press the ◄ or ► button to select an antenna connection, then press the ENTER button. ➢ Air: “Air” antenna signal. Cable: “Cable”...
  • Page 22 Setting Up the Remote to Operate Your Cable Box Turn off your cable box. Press the CABLE button on your TV’s remote control. Press the SET button on your TV’s remote control. Using the number buttons on your remote control, enter three digits of the cable box code listed on page 24 of this manual for your brand of cable box.
  • Page 23 Remote Control Codes Brand Code Brand Code SAMSUNG 000 001 002 003 004 005 077 078 079 MITSUBISHI 019 034 041 046 ADMIRAL MONTGOMERY WARD AIWA 002 025 AKAI 004 027 032 MULTITECH 002 005 025 038 AUDIO DYNAMICS 007 026 007 008 018 026 037 062 064 BELL&HOWELL...
  • Page 24 019 021 023 028 PIONEER 004 018 020 044 WARNER AMEX 014 022 040 ZENITH 017 029 035 037 045 REGAL SAMSUNG SET-TOP BOX Product Code Product Code Ground wave STB 001 002 Satellite STB HDD COMBO Premium Satellite STB...
  • Page 25 SAMSUNG DVD Product Code Product Code 000 001 002 Home Theater VCR COMBO 014 015 016 DVDR 003 004 HDD Record COMBO BD Record 005 006 TWIN TRAY COMBO VCR COMBO 007 008 009 010 011 STB DVD COMBO VCR Record...
  • Page 26: To Select The Source

    To Select the Source Use to select TV or other external input sources such as DVD players, VCRs, etc. connected to the TV. Press the MENU button. Press the ◄ or ► button to select Input, then press the ENTER button. Press the ▲...
  • Page 27: Picture Control

    Picture Control Using Automatic Picture Settings Your TV has three automatic picture settings (“Dynamic”, “Standard”, “Movie”) that are preset at the factory. You can activate a Picture Setting by making a selection from the menu. Press the MENU button. Press the ENTER button to select Picture. Press the ▲...
  • Page 28 Press the ▲ or ▼ button to select Color Tone, then press the ENTER button. Picture Return Mode Dynamic Contrast Brightness Sharpness Color Tint Color Tone Cool1 Detailed Settings Size 16:9 Picture Enter Press the ▲ or ▼ button to select Cool2, Cool1, Normal, Warm1, or Warm2, then press the ENTER button.
  • Page 29: Making Detailed Picture Settings

    Making Detailed Picture Settings You can set detailed picture settings. Press the MENU button. Picture Press the ENTER button to select Picture. Return Press the ▲ or ▼ button to select Detailed Settings, then press the ENTER button. Mode Standard Contrast Brightness Sharpness...
  • Page 30: Changing The Screen Size

    Changing the Screen Size You can select the picture size which best corresponds to your viewing requirements. Press the MENU button. Press the ENTER button to select Picture. Press the ▲ or ▼ button to select Size, then press the ENTER button. Press the ▲...
  • Page 31: Digital Noise Reduction

    Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. Press the MENU button. Picture Press the ENTER button to select Picture. Tint Press the ▲...
  • Page 32: Setting The Active Color

    Setting the Active Color If you turn on this option, the colors of the sky and grass will be stronger and clearer for a more vivid on-screen picture. Press the MENU button. Picture Press the ENTER button to select Picture. Tint Press the ▲...
  • Page 33: Adjusting The Screen Position

    Adjusting the Screen Position You can adjust the horizontal and vertical position of the screen. Press the MENU button. Press the ENTER button to select Picture. Press the ▲ or ▼ button to select Position, then press the ENTER button. Press the ▲/▼/◄/►...
  • Page 34: Customizing The Sound

    Customizing the Sound The sound settings can be adjusted to suit your personal preference. (Alternatively, you can use one of the “automatic” settings.) Press the MENU button. Mode Press the ◄ or ► button to select Sound, then press the ENTER button. Return Press the ▲...
  • Page 35: Setting The Trusurround Xt

    Setting the TruSurround XT TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. Press the MENU button.
  • Page 36: Choosing A Multi-Channel Sound (Mts) Track - Digital

    Choosing a Multi-Channel Sound (MTS) Track - Digital The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages). The availability of these additional “multitracks” depends upon the program.
  • Page 37: Automatic Volume Control

    Automatic Volume Control Reduces the difference in volume level among broadcasters. Press the MENU button. Sound Press the ◄ or ► button to select Sound, then press the ENTER button. Return Press the ▲ or ▼ button to select Auto Volume, then press the ENTER button. Mode SRS TruSurround XT Preferred Language...
  • Page 38: Channel Control

    Channel Control Clearing Scrambled Channels - Digital The Clear Scrambled Channel function is used to filter out scrambled channels after Auto Program is completed. It removes the scrambled channels from the list by tuning the digital cable channels. This process may take up to 20-30 minutes. Press the MENU button.
  • Page 39: Setting Your Favorite Channels

    Press the ▲/▼/◄/► buttons to select a channel to add, then press the ENTER button. Press the ▲ or ▼ button to select Add, then press the ENTER button to add the channel. symbol appears prior to the corresponding channel number. Press the ▲...
  • Page 40: Viewing The Channel Lists

    Viewing the Channel Lists You can display a list of all channels, added channels or your favorite channels. Press the MENU button. Channel Press the ◄ or ► button to select Channel, then press the ENTER button. Return Press the ▲ or ▼ button to select Channel List, then press the ENTER button. Antenna Auto Program Clear Scrambled Channel...
  • Page 41: Setting The Default Channel List Mode

    Setting the Default Channel List Mode You can set All, Added, or Favorite to be the Default List that appears when you press the CH LIST button. Press the MENU button. Press the ◄ or ► button to select Channel, then press the ENTER button. Press the ▲...
  • Page 42: Checking The Digital-Signal Strength - Digital

    Checking the Digital-Signal Strength - Digital Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels.
  • Page 43: Function Description

    Function Description Selecting a Menu Language Press the MENU button. Setup Press the ◄ or ► button to select Setup, then press the ENTER button. Return Press the ▲ or ▼ button to select Language, then press the ENTER button. Plug &...
  • Page 44 Press the ▲ or ▼ button to select DST (Daylight Saving Time), then press the ENTER button. Press the ▲ or ▼ button to select Off or On, then press the ENTER button. Press the EXIT button to exit. ➢ Depending on the broadcast station and signal, the auto time may not be set correctly.
  • Page 45: Using The Game Mode

    Setting the On/Off Timer Setup Return Use this feature to set the TV to turn on or off at a desired time. Plug & Play English Press the MENU button. Language Clock Press the ◄ or ► button to select Setup, then press the ENTER button. Sleep Timer Press the ▲...
  • Page 46: Using The 3D/Dual-View Function

    Using the 3D/Dual-View Function For the information of how to use the 3D/Dual-View Function, ● Please go to www.samsung.com → ‘PRODUCTS’ → ‘HDTV’ → ‘DLP TV’ ● Click “3D/Dual-View Information” Using the V-Chip U.S.A Only This product is covered by the following U.S. patents : US4,930,158 US4,930,160 The V-Chip feature automatically locks out programs that are deemed inappropriate for children.
  • Page 47 Setting Up Your Personal ID Number (PIN) Press the MENU button. Setup Press the ◄ or ► button to select Setup, then press the ENTER button. V-Chip ► Press the ▲ or ▼ button to select V-Chip, then press the ENTER button. Caption Menu Transparency Medium...
  • Page 48 How to Set up Restrictions Using “TV Parental Guidelines” First, set up a personal identification number (PIN), and enable the V-Chip. (See previous Setup section.) Parental restrictions can be set up using either of two methods: The TV V-Chip ► guidelines or the MPAA rating.
  • Page 49 At this point, one of the TV-Ratings is selected. Press the ENTER button. Depending on TV Parental Guidelines your existing setup, the “ ” symbol will be selected. (Blank = Unblocked, = Blocked) Return While “ ” is selected, press the ENTER button to block or unblock the category. To select Allow All Block All a different TV-Rating, press the ▲...
  • Page 50 How to Set up Restrictions Using “Canadian English” (for Canada Models) Press the ▲ or ▼ button to select Canadian English, then press the ENTER button. V-Chip Return V-Chip Lock TV Parental Guidelines MPAA Rating 10 The Canadian English screen will appear. Canadian English ►...
  • Page 51 Using the V-Chip for Digital Channels V-Chip Return Parental restriction information can be used while watching DTV channels. V-Chip Lock TV Parental Guidelines 13 Press the ▲ or ▼ button to select Downloadable U.S. Rating, then press the ENTER MPAA Rating button.
  • Page 52: Viewing Closed Captions (On-Screen Text Messages) - Digital

    Viewing Closed Captions (On-Screen Text Messages) - Digital The Digital Captions function operates on digital channels. Press the MENU button. Press the ◄ or ► button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select Caption, then press the ENTER button. Press the ▲...
  • Page 53: Viewing Closed Captions (On-Screen Text Messages) - Analog

    Viewing Closed Captions (On-Screen Text Messages) - Analog The Analog Caption function operates in either analog TV channel mode or external signal mode. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.) Press the MENU button. Press the ◄...
  • Page 54: Menu Transparency Level

    Menu Transparency Level Adjusts the transparency of the menu screen. Press the MENU button. Setup Press the ◄ or ► button to select Setup, then press the ENTER button. V-Chip Press the ▲ or ▼ button to select Menu Transparency, then press the ENTER button. Caption Menu Transparency Medium...
  • Page 55: Adjusting The Melody Sound

    Adjusting the Melody Sound The TV power on/off melody sound can be adjusted. Setup V-Chip Press the MENU button. Caption Press the ◄ or ► button to select Setup, then press the ENTER button. Menu Transparency Medium Press the ▲ or ▼ button to select Melody, then press the ENTER button. Blue Screen Melody Medium...
  • Page 56: Setting The Light Effect

    Setting the Light Effect You can turn on/off the blue LED on the front of TV according to the situation. Use it for saving power or when the LED dazzles your eyes. Press the MENU button. Setup Press the ◄ or ► button to select Setup, then press the ENTER button. V-Chip Press the ▲...
  • Page 57: Setting The Film Mode - Analog

    Setting the Film Mode - Analog You can automatically sense and process film signals and adjust the picture for optimum quality. Press the MENU button. Setup Press the ◄ or ► button to select Setup, then press the ENTER button. Blue Screen Press the ▲...
  • Page 58: Upgrading The Software

    Upgrading the Software Samsung call center at 1-800-SAMSUNG to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on the side of your TV. Insert a USB drive containing the firmware upgrade into the USB Upgrade Port on the side of the TV.
  • Page 59: Pc Display

    Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) First, click on Control Panel on the Windows start menu.
  • Page 60: Display Modes

    Display Modes If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video.
  • Page 61: Setting Up The Tv With Your Pc

    Setting up the TV with your PC How to Auto Adjust Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives from the PC. The function also automatically fine-tunes the settings and adjusts the frequency values and positions. ➢...
  • Page 62 Changing the Screen Position After connecting the TV to your PC, adjust the position of the screen if it is not well-aligned. ➢ Change to the PC mode first. Press the ▲ or ▼ button to select Position, then press the ENTER button. Return Image Lock Position...
  • Page 63: Changing The Picture Size (Pc Mode)

    Changing the Picture Size (PC Mode) You can select the picture size which best corresponds to your viewing requirements. Press the MENU button. Press the ENTER button to select Picture. Press the ▲ or ▼ button to select Size, then press the ENTER button. Press the ▲...
  • Page 64: Wiselink

    Examples of MSC are Thumb drives and Flash Card Readers. ● Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.
  • Page 65: Using The Wiselink Mode

    Using the WISELINK Mode Press the MENU button. Press the ◄ or ► button to select Application, then press the ENTER button. Press the ▲ or ▼ button to select WISELINK, then press the ENTER button. Press the ▲ or ▼ button to select the corresponding USB Memory Device, then press the ENTER button.
  • Page 66: Using The Photo (Jpeg) List

    Using the Photo (JPEG) List You can play back the JPEG files saved on a memory device in various ways. After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 65) Press the ENTER button to select Photo. JPEG files and existing folders are displayed.
  • Page 67 Using the Options Menu Slide Show: Starts a slide show. (Refer to “Viewing a Slide Show” on page 67) Rotate: You can rotate images in full screen mode. Images are rotated in the order of 90°, 180°, 270°, and 0° (original state). (Refer to “Rotating”...
  • Page 68 Using the Menu during a Slide Show Slide Show Speed: Fast Select to control the slide show speed. Each time the ENTER button is pressed, the speed changes repeatedly. (Fast → Slow → Normal) Background Music On/Off: Music On Select to choose whether you want to play MP3 file during a slide show. Each time the ENTER button is pressed, the background music activation changes repeatedly.
  • Page 69 Rotating After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 65) Press the ENTER button to select Photo. JPEG files and existing folders are displayed. Press the ▲/▼/◄/► buttons to select a file, then press the ENTER button. Pressing the button over a photo icon shows the currently selected photo in full screen.
  • Page 70 Zooming-In After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 65) Press the ENTER button to select Photo. JPEG files and existing folders are displayed. Press the ▲/▼/◄/► buttons to select a file, then press the ENTER button. Pressing the button over a photo icon shows the currently selected photo in full screen.
  • Page 71: Using The Music (Mp3) List

    Using the Music (MP3) List You can play back the MP3 files saved on a memory device in various ways. After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 65) Press the ◄ or ► button to select Music, then press the ENTER button. MP3 files and existing folders are displayed.
  • Page 72: Using The Setup Menu

    Using the Setup Menu Setup displays the user settings of the WISELINK menu After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 65) Press the ◄ or ► button to select Setup, then press the ENTER button. The Setup menu is displayed.
  • Page 73: Appendix

    Appendix Identifying Problems If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest Samsung service center. Problem Possible Solution Poor picture quality. - Try another channel.
  • Page 74: Replacing The Lamp

    The lamp type is indicated on the side of the TV. It is also indicated on the lamp case. ● After checking the code number for the lamp, give the code number to the store where you purchased the TV or to a Samsung Service center.
  • Page 75: Cleaning And Maintaining Your Tv

    Separate the Lamp from the engine by holding the handle and pulling it out. ➢ ● Be sure the replacement Lamp is the same type. ● After replacing the lamp, align the lamp cover with the groove and secure the screws. ●...
  • Page 76: Technical Specifications

    Technical Specifications The descriptions and characteristics in this booklet are given for information purposes only and are subject to modification without notice. Model Name HL-T5076S HL-T5676S HL-T6176S Screen Size (Diagonal) 50 inch 56 inch 61 inch Power Consumption 230 W PC Resolution 1920 X 1080 @ 60Hz Sound (Output)
  • Page 77  This product uses some software programs which are distributed under the GPL/LGPL license. Accordingly, the following GPL and LGPL software source codes that have been used in this product can be provided after asking to vdswmanager@samsung.com. GPL software: Linux Kernel, Busybox, Binutils...
  • Page 78 These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
  • Page 79 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.
  • Page 80 GNU Lesser General Public License (LGPL) Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL.
  • Page 81 “Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License;...
  • Page 82 Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6.
  • Page 83 This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded.
  • Page 84 DLP TV Manual de instrucciones HL-T5076S HL-T5676S HL-T6176S Gane premios cuando registre su producto en www.samsung.com/global/register Apunte aquí los números de serie y modelo para consultas futuras. ▪ Modelo _______________ ▪ Nº serie. _______________...
  • Page 85 ISO/IEC 11172-3 o ISO/IEC 13818-3. No se otorga ningún derecho bajo esta licencia para características o funciones del producto que no estén conformes con el ISO/IEC 11172-3 o ISO/IEC 13818-3. © 2007 Samsung Electronics Co., Ltd. All rights reserved. Español - 2...
  • Page 86 Preguntas y respuestas 1. Es la antena que utiliza para recepción de TV lo suficientemente buena para DTV? funciona bien con muchas antenas de TV existentes. Sin embargo, las asignaciones de canales de las emisiones de DTV son diferentes que los canales analógicos. Debe descubrir si las emisiones de DTV locales están en VHF (canales 2-13) o UHF (canales 14-69) para ver si necesita una antena diferente.
  • Page 87 Índice INFORMACIÓN GENERAL CONTROL DE LOS CANALES ■ Posición de visualización ......... 5 ■ Supresión de los canales codificados digitales ..38 ■ Características ............5 ■ Adición y borrado de canales ......... 38 ■ Comprobación de los componentes ......6 ■...
  • Page 88: Información General

    Información general Posición de visualización Para conseguir la mejor calidad de visualización, siga las directrices siguientes referentes a la distancia de visualización. Siéntese lo más lejos posible de la pantalla si va a mirarla durante un período prolongado. <Vista superior> <Vista lateral>...
  • Page 89: Comprobación De Los Componentes

    Comprobación de los componentes Manual de Mando a distancia/ Tarjeta de garantía/ Cable de Paño de Tarjeta de registro/ instrucciones (BP59-00125A)/ alimentación limpieza Manual de seguridad/ pilas AAA (3903-000144) Manual de referencia rápida/ Se vende por separado Cable de S-Vídeo Cable de vídeo Cable de la antena Cables de componentes Cables de audio Lamp de recambio...
  • Page 90 1 SOURCE (ENTER) Cambia entre todas las fuentes de entrada disponibles Se pulsa para confirmar una selección. (TV, AV1, AV2, S-Video1, S-Video2, Componente1, 6 Botón de encendido Componente2, PC, HDMI1, HDMI2 o HDMI3/DVI). Púlselo para encender o apagar el TV. 2 MENU 7 Sensor del mando a distancia Púlselo para ver un menú...
  • Page 91: Aspecto General Del Panel De Conexiones

    Aspecto general del panel de conexiones Tomas del panel lateral Use las tomas del panel lateral para conectar componentes de A/V que estarán disponibles permanentemente, como un vídeo o un reproductor de DVD. Si precisa información sobre la conexión de equipos, consulte las páginas 10~16. 1 ANT 1 IN (CABLE)/ANT 2 IN (AIR) Conector coaxial de 75Ω...
  • Page 92: Mando A Distancia

    Mando a distancia Puede utilizar el mando a una distancia de hasta 7 metros del televisor. Al usarlo, apunte directamente al televisor. También se puede utilizar el mando a distancia para hacer funcionar el aparato de vídeo, el decodificador de cable, el reproductor de DVD y el decodificador.
  • Page 93: Instalación De Las Pilas En El Mando A Distancia

    Instalación de las pilas en el mando a distancia Levante la tapa de la parte posterior del mando a distancia, como se muestra en la ilustración. Instale dos baterías de tamaño AAA. ➢ ● Asegúrese de respetar los extremos “+” y “–” de las pilas indicados en el diagrama del interior del compartimento.
  • Page 94: Conexión De Tv Por Cable

    Conexión de TV por cable Para conectar a un sistema de TV por cable, siga estas instrucciones. Cable sin decodificador Enchufe el cable de entrada en el terminal ANT 1 IN (CABLE) en el lateral del televisor. ➢ Dado que el TV tiene previsto el uso de televisión por cable, no se necesita un decodificador para ver canales de cable no codificados.
  • Page 95: Conexión De Un Aparato De Vídeo

    ➢ Cuando conecte un aparato de vídeo, debe hacer coincidir los colores del terminal de conexión y del cable. Conexión de S-Vídeo Este televisor Samsung se puede Panel lateral del TV conectar a una toma S-Video de un aparato de vídeo.
  • Page 96: Conexión De Una Videocámara

    Conexión de una videocámara Los conectores del panel lateral del TV facilitan la conexión a una videocámara. Así podrá ver las cintas de la cámara de vídeo sin usar un reproductor. Conecte un cable de vídeo o de Panel lateral del TV Videocámara S-Vídeo entre la toma AV IN 1 [VIDEO] o [S-VIDEO] (o AV IN 2...
  • Page 97: Conexión A Un Reproductor De Dvd/ Decodificador A Través De Hdmi

    Conexión a un reproductor de DVD/decodificador a través de HDMI Esta conexión sólo se puede realizar si hay una toma de salida de HDMI en el dispositivo externo. Conecte un cable HDMI entre la Panel lateral del TV toma HDMI IN 1 (o HDMI IN 2) del televisor y la toma HDMI OUT del Reproductor de DVD/ reproductor DVD/decodificador.
  • Page 98: Conexión De Un Sistema De Audio Digital

    Conexión de un sistema de audio digital Las tomas del panel lateral del televisor facilitan la conexión de un sistema de audio digital al televisor. Conecte un cable óptico entre Panel lateral del TV la toma DIGITAL AUDIO OUT (OPTICAL) del televisor y la toma Digital Audio Input del sistema de audio digital.
  • Page 99: Conexión A Un Pc

    Conexión a un PC Uso del cable D-Sub Conecte un cable D-Sub entre la toma PC IN [PC] del televisor y la Uso del cable D-Sub Panel lateral del TV toma de salida PC del ordenador. Conecte un cable de audio PC entre la toma PC IN [AUDIO] del televisor y la toma de salida de audio de la tarjeta de sonido del...
  • Page 100: Función Plug & Play

    Función Plug & Play Cuando el televisor se enciende por primera vez, los valores se inician correlativamente de forma automática: Pulse el botón POWER del mando a distancia. Plug & Play Se muestra automáticamente el mensaje Se ajustarán idioma del Menú, modo Se ajustarán idioma del Menú, modo Comercio, canales y Comercio, canales y hora.
  • Page 101: Cambio De Canales

    Ajuste automático del reloj Pulse los botones ◄ o ► para seleccionar Apagado o Encendido y pulse el botón ENTER. Aparece el mensaje Seleccione la zona horaria en la que se encuentra.. 10 Pulse los botones ▲ o ▼ para resaltar la zona horaria del área local (y para mover la selección a la zona horaria apropiada en el mapa de Estados Unidos).
  • Page 102: Ajuste Del Volumen

    Ajuste del volumen Pulse los botones VOL + o VOL – para aumentar o reducir el volumen. Utilización del botón MUTE Puede interrumpir el sonido en cualquier momento pulsando el botón MUTE. Pulse el botón MUTE y se desconectará el sonido. En la esquina inferior izquierda de la pantalla aparecerá...
  • Page 103: Exploración De Los Menús Con El Mapa De Menús

    Exploración de los menús con el mapa de menús Mediante la opción Mapa de menús del menú principal se pueden ver todos los menús y seleccionar una función rápidamente. Con el mapa de menús se puede seleccionar cualquier menú. Pulse el botón MENU. Mapa de menús El menú...
  • Page 104: Configuración Del Mando A Distancia

    Almacenamiento de los canales en la memoria (método automático). Pulse los botones ▲ o ▼ para seleccionar Prog. Auto y pulse el botón ENTER. Pulse los botones ◄ o ► para seleccionar la conexión de la antena y pulse el botón ENTER.
  • Page 105 Configuración del mando a distancia para controlar el decodificador de cable Apague el decodificador de cable. Pulse el botón CABLE del mando a distancia del televisor. Pulse el botón SET del mando a distancia del televisor. Mediante los botones numéricos del mando a distancia, introduzca los tres dígitos del código de decodificador de cable correspondientes a la marca de su decodificador, que aparece en la lista de la página 24 de este manual.
  • Page 106 Códigos del mando a distancia APARATO DE VÍDEO Marca Código Marca Código SAMSUNG 000 001 002 003 004 005 077 078 079 MITSUBISHI 019 034 041 046 ADMIRAL MONTGOMERY WARD AIWA 002 025 AKAI 004 027 032 MULTITECH 002 005 025 038...
  • Page 107 019 021 023 028 PIONEER 004 018 020 044 WARNER AMEX 014 022 040 ZENITH 017 029 035 037 045 REGAL RECEPTOR DE TV DIGITAL DE SAMSUNG Producto Código Producto Código Ground wave STB 001 002 Satellite STB HDD COMBO Premium...
  • Page 108 DVD DE SAMSUNG Producto Código Producto Código 000 001 002 Home Theater VCR COMBO 014 015 016 DVDR 003 004 HDD Record COMBO BD Record 005 006 TWIN TRAY COMBO VCR COMBO 007 008 009 010 011 STB DVD COMBO...
  • Page 109: Para Seleccionar La Fuente

    Para seleccionar la fuente Úselo para seleccionar TV u otras fuentes de entrada externas como reproductores de DVD, vídeos, etc., conectados al televisor. Pulse el botón MENU. Pulse los botones ◄ o ► para seleccionar Entrada y pulse el botón ENTER. Pulse los botones ▲...
  • Page 110: Control De La Imagen

    Control de la imagen Utilización de los ajustes de imagen automáticos El televisor tiene tres ajustes de imagen automáticos (“Dinámico”, “Normal” y “Cine”) preajustados en fábrica. Se puede activar un ajuste de la imagen seleccionándolo en el menú. Pulse el botón MENU. Pulse el botón ENTER para seleccionar Imagen.
  • Page 111 Pulse los botones ▲ o ▼ para seleccionar Tono Color y pulse el botón ENTER. Imagen Regresar Modo Dinámico Contraste Luminosidad Definición Color Tinte Tono Color Frío1 Configuración detallada Tamaño 16:9 Picture Ingresar Pulse los botones ▲ o ▼ para seleccionar Frío2, Frío1, Normal, Tibio1 o Tibio2 y pulse Imagen el botón ENTER.
  • Page 112: Configuración Detallada De Los Valores De La Imagen

    Configuración detallada de los valores de la imagen Puede realizar una configuración detallada de los valores de la imagen. Pulse el botón MENU. Imagen Pulse el botón ENTER para seleccionar Imagen. Regresar Pulse los botones ▲ o ▼ para seleccionar Configuración detallada y pulse el botón Modo Normal ENTER.
  • Page 113: Cambio Del Tamaño De La Pantalla

    Cambio del tamaño de la pantalla Puede seleccionar el tamaño de imagen que mejor se adapte a sus requisitos de visualización. Pulse el botón MENU. Pulse el botón ENTER para seleccionar Imagen. Pulse los botones ▲ o ▼ para seleccionar Tamaño y pulse el botón ENTER. Pulse los botones ▲...
  • Page 114: Reducción Digital De Ruido

    Reducción digital de ruido Si la señal de emisión que recibe el televisor es débil, puede activarse la función de reducción digital del ruido (Digital Noise Reduction) para reducir la estática y las imágenes superpuestas que pueden aparecer en la pantalla. Pulse el botón MENU.
  • Page 115: Configuración Del Color Activo

    Configuración del color activo Si activa esta opción, los colores del cielo y del césped se ven más sólidos y claros y la imagen de la pantalla aparece más vívida. Pulse el botón MENU. Imagen Pulse el botón ENTER para seleccionar Imagen. Tinte Pulse los botones ▲...
  • Page 116: Ajuste De La Posición De La Pantalla

    Ajuste de la posición de la pantalla Puede ajustar la posición horizontal y vertical de la pantalla. Pulse el botón MENU. Pulse el botón ENTER para seleccionar Imagen. Pulse los botones ▲ o ▼ para seleccionar Posición y pulse el botón ENTER. Pulse los botones ▲/▼/◄/►...
  • Page 117: Personalización Del Sonido

    Personalización del sonido Los parámetros de sonido pueden ajustarse para que se adapten a sus preferencias personales. (De manera alternativa, puede usar uno de los ajustes automáticos.) Pulse el botón MENU. Modo Pulse los botones ◄ o ► para seleccionar Sonido y pulse el botón ENTER. Regresar Pulse los botones ▲...
  • Page 118: Ajuste De Srs Tsxt

    Ajuste de SRS TSXT TruSurround XT es una tecnología SRS patentada que solventa el problema de reproducir contenido multicanal 5.1 en dos altavoces. Trusurround proporciona una sensación de sonido virtual convincente a través de cualquier sistema de reproducción con dos altavoces. Es totalmente compatible con todos los formatos multicanal. Pulse el botón MENU.
  • Page 119: Elección De Una Pista Sonora Multicanal (Mts) - Digital

    Elección de una pista sonora multicanal (MTS) - Digital El sistema de transmisión de TV digital permite transmitir simultáneamente muchas pistas de audio (por ejemplo, traducciones simultáneas del programa en otros idiomas). La disponibilidad de estas “multipistas” adicionales depende del programa.
  • Page 120: Control Automático De Volumen

    Control automático de volumen Reduce las diferencias en el nivel de volumen entre las emisoras. Pulse el botón MENU. Sonido Pulse los botones ◄ o ► para seleccionar Sonido y pulse el botón ENTER. Regresar Pulse los botones ▲ o ▼ para seleccionar Vol. Auto y pulse el botón ENTER. Modo Trusurround SRS XT Apagado...
  • Page 121: Control De Los Canales

    Control de los canales Supresión de los canales codificados digitales La función Borrar canal encriptado se usa para filtrar los canales codificados después de realizar una búsqueda automática. Borra los canales encriptados de la lista sintonizando los canales digitales por cable. Puede tardar de 20 a 30 minutos. Pulse el botón MENU.
  • Page 122: Ajuste De Los Canales Favoritos

    Pulse los botones ▲/▼/◄/► para seleccionar el canal que desee añadir y, a continuación, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Añadir y, a continuación, pulse el botón ENTER. El símbolo aparece antes del número de canal correspondiente. Pulse los botones ▲...
  • Page 123: Visualización De Las Listas De Canales

    Visualización de las listas de canales Se pueden ver las listas de todos los canales, de los añadidos y de los favoritos. Pulse el botón MENU. Canal Pulse los botones ◄ o ► para seleccionar Canal y pulse el botón ENTER. Regresar Pulse los botones ▲...
  • Page 124: Configuración Del Modo Lista De Canales Predeterminada

    Configuración del modo Lista de canales predeterminada Puede configurar Todos, Añadir o Favoritos para que se vean en la lista predeterminada que aparece cuando se pulsa el botón CH LIST. Pulse el botón MENU. Pulse los botones ◄ o ► para seleccionar Canal y pulse el botón ENTER. Pulse los botones ▲...
  • Page 125: Comprobación De La Potencia De La Señal Digital - Digital

    Comprobación de la potencia de la señal digital - Digital A diferencia de los canales analógicos, cuya calidad de recepción puede variar desde “nebuloso” a claro, los canales digitales (HDTV) tienen una calidad de recepción perfecta o no se reciben en absoluto. Por tanto, a diferencia de los canales analógicos, no puede sintonizar ningún canal digital.
  • Page 126: Descripción De Las Funciones

    Descripción de las funciones Selección del idioma de los menús Pulse el botón MENU. Configuración Pulse los botones ◄ o ► para seleccionar Configuración y pulse el botón ENTER. Regresar Pulse los botones ▲ o ▼ para seleccionar Idioma y pulse el botón ENTER. Plug &...
  • Page 127 Pulse los botones ▲ o ▼ para seleccionar Tiempo Verano y pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Apagado o Encendido y pulse el botón ENTER. Pulse el botón EXIT para salir. ➢ Según la estación emisora y la señal, puede que el ajuste automático de la hora no se realice correctamente.
  • Page 128: Uso Del Modo Juego

    Activación y desactivación del temporizador Configuración Regresar Utilice esta función para que el televisor se encienda o apague a una hora concreta. Plug & Play Español Pulse el botón MENU. Idioma Reloj Pulse los botones ◄ o ► para seleccionar Configuración y pulse el botón ENTER. Apagado Temporizador Pulse el botón ▲...
  • Page 129: Uso De La Función 3D/Dual-View

    Uso de la función 3D/Dual-View Para obtener más información acerca de cómo usar la función 3D/Dual-View, ● vaya a www.samsung.com ? ‘PRODUCTS’ ? ‘HDTV’ ? ‘DLP TV’ ● Haga clic en “3D/Dual-View Information” Uso del V-Chip La opción V-Chip bloquea automáticamente los programas que no se consideran apropiados para los menores. El usuario debe introducir primero un código PIN (número de identificación personal) para configurar o cambiar las limitaciones de...
  • Page 130 Configuración del código de identificación personal (PIN) Pulse el botón MENU. Configuración Pulse los botones ◄ o ► para seleccionar Configuración y pulse el botón ENTER. V-Chip ► Pulse los botones ▲ o ▼ para seleccionar V-Chip y pulse el botón ENTER. Subtítulo Transpar.
  • Page 131 Configuración de las restricciones mediante las “Guías pater. TV” En primer lugar, configure un código de identificación personal (PIN) y active la función Configuración V-Chip. (Consulte la sección anterior.) Las limitaciones pueden configurarse de dos V-Chip ► formas: Guía de programas o Clasificación MPAA. Subtítulo Transpar.
  • Page 132 En este punto, ya se habrá seleccionado una de las clasificaciones de televisión. Pulse el Guías pater. TV botón ENTER. Dependiendo de la configuración existente, se seleccionará el símbolo “ ”. Regresar (En blanco = Desbloqueada, = Bloqueada) Perm. Todo Bloq. Todo Con “...
  • Page 133 Cómo configurar las limitaciones utilizando el sistema inglés canadiense (para modelos de Canadá) Pulse los botones ▲ o ▼ para seleccionar Inglés Canadiense y pulse el botón ENTER. V-Chip Regresar Bloqueo V-Chip Encendido Guías pater. TV Clas. MPAA 10 Aparecerá la pantalla Inglés Canadiense. Inglés Canadiense ►...
  • Page 134 Uso de V-Chip (V-Chip) con los canales digitales V-Chip Return La información de la restricción de bloqueo se puede usar mientras se ven los canales Bloqueo V-Chip Encendido DTV. Guías pater. TV Clas. MPAA 13 Pulse los botones ▲ o ▼ para seleccionar Clasificación U.S. Descargable y pulse el Inglés Canadiense botón ENTER.
  • Page 135: Visualización De Subtítulos (Mensajes De Texto En Pantalla) - Digital

    Visualización de subtítulos (mensajes de texto en pantalla) - Digital La función digital Subtítulo funciona en canales digitales. Pulse el botón MENU. Pulse los botones ◄ o ► para seleccionar Configuración y pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Subtítulo y pulse el botón ENTER. Pulse los botones ▲...
  • Page 136: Visualización De Subtítulos (Mensajes De Texto En Pantalla) - Analogica

    Visualización de subtítulos (mensajes de texto en pantalla) - Analogica La función analógica Subtítulo funciona en un modo de canal de TV analógico o en modo de fuente externa. (Dependiendo de la señal de transmisión, la función analógica Subtítulo puede funcionar en canales digitales.) Pulse el botón MENU.
  • Page 137: Nivel De Transparencia De Los Menús

    Nivel de transparencia de los menús Ajusta la transparencia de la pantalla de menús. Pulse el botón MENU. Configuración Pulse los botones ◄ o ► para seleccionar Configuración y pulse el botón ENTER. V-Chip Pulse los botones ▲ o ▼ para seleccionar Transpar. del menú y pulse el botón ENTER. Subtítulo Transpar.
  • Page 138: Ajuste Del Sonido De La Melodía

    Ajuste del sonido de la melodía El sonido de la melodía del encendido y del apagado del televisor se puede configurar. Configuración V-Chip Pulse el botón MENU. Subtítulo Pulse los botones ◄ o ► para seleccionar Configuración y pulse el botón ENTER. Transpar.
  • Page 139: Cofiguración Del Led Azul

    Cofiguración del LED azul Se puede apagar o encender el LED azul del frontal del televisor según las circunstancias. Use esta función para ahorrar energía o si el LED le molesta a la vista. Pulse el botón MENU. Configuración Pulse los botones ◄ o ► para seleccionar Configuración y pulse el botón ENTER. V-Chip Pulse los botones ▲...
  • Page 140: Ajuste De La Función Modo Película

    Ajuste de la función Modo película - Analogica Puede detectar y procesar automáticamente las señales de las películas y ajustar la imagen para conseguir una calidad óptima. Pulse el botón MENU. Configuración Pulse los botones ◄ o ► para seleccionar Configuración y pulse el botón ENTER. Pantalla Azul Apagado Pulse los botones ▲...
  • Page 141: Actualización Del Software

    Actualización del software Póngase en contacto con el centro de llamadas de Samsung en 1-800-SAMSUNG para recibir información acerca de la descarga de las actualizaciones y del uso de un controlador USB. Las actualizaciones se pueden realizar conectando una unidad USB al puerto USB situado en el lateral del televisor.
  • Page 142: Pantalla De Pc

    Aunque las pantallas reales sean diferentes, la información de configuración básica que se aplica en casi todos los casos es la misma. (En caso contrario, póngase en contacto con el fabricante del ordenador o con el distribuidor de Samsung.) Primero, haga clic en Panel de control en el menú Inicio de Windows.
  • Page 143: Modos De Visualización

    Modos de visualización Si la señal del sistema es igual al modo de señal estándar, la pantalla se ajusta automáticamente. Si la señal del sistema no es igual al modo de señal estándar, ajuste el modo consultando la guía del usuario de la tarjeta de vídeo; de lo contrario, puede no haber señal de vídeo.
  • Page 144: Ajuste Del Televisor Con El Ordenador

    Ajuste del televisor con el ordenador Cómo realizar un ajuste automático Mediante la función Ajuste automático (Auto Adjust) se puede establecer que el televisor se ajuste automáticamente de acuerdo con las señales de vídeo que recibe del ordenador. Esta función también ajusta automáticamente la configuración, los valores de frecuencia y la posición. ➢...
  • Page 145 Cambio de la posición de la pantalla Una vez conectado el televisor al PC, ajuste la posición de la imagen si no está bien alineada. ➢ Debe cambiar al modo PC en primer lugar. Pulse los botones ▲ o ▼ para seleccionar Posición y pulse el botón ENTER. Regresar Fijar la Imagen Posición...
  • Page 146: Cambio Del Tamaño De Imagen (Modo Pc)

    Cambio del tamaño de imagen (modo PC) Puede seleccionar el tamaño de imagen que mejor se adapte a sus requisitos de visualización. Pulse el botón MENU. Pulse el botón ENTER para seleccionar Imagen. Pulse los botones ▲ o ▼ para seleccionar Tamaño y pulse el botón ENTER. Pulse el botón ▲...
  • Page 147: Wiselink

    ● Antes de conectar el dispositivo al televisor, haga una copia de seguridad de sus archivos para evitar daños o pérdidas de datos. SAMSUNG no se hace responsable del daño o pérdida de datos que pueda sufrir archivo alguno. Uso de los botones del mando a distancia con el menú WISELINK Botón...
  • Page 148: Uso Del Modo Wiselink

    Uso del modo WISELINK Pulse el botón MENU. Pulse los botones ◄ o ► para seleccionar Aplicación y pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar WISELINK y pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar el dispositivo de memoria USB correspondiente y pulse el botón ENTER.
  • Page 149: Uso De La Lista Foto (Jpeg)

    Uso de la lista FOTO (JPEG) Los archivos JPEG guardados en la memoria del dispositivo se pueden reproducir de varias maneras. Después de cambiar al modo WISELINK, seleccione un dispositivo de memoria que tenga instalado. (Consulte la página 65.) Pulse el botón ENTER para seleccionar Photo. Se muestran los archivos JPEG y las carpetas existentes.
  • Page 150 Uso del menú Opciones Secuencia: Inicia un visionado automático. (Consulte “Visualización de una presentación” en la página 67.) Girar: Puede girar las imágenes en el modo de pantalla completa. Las imágenes se giran 90º, 180º, 270º y 0° (estado original). (Consulte “Rotating”...
  • Page 151 Uso del menú durante el visionado automático Repetir Slide Show: Rápida Permite seleccionar la velocidad de presentación del visionado automático. Cada vez que se pulsa el botón ENTER cambia la velocidad. (Rápida → Lenta → Normal) Música de fondo act./des.: Música enc.
  • Page 152 Giro Después de cambiar al modo WISELINK, seleccione un dispositivo de memoria que tenga instalado. (Consulte la página 65.) Pulse el botón ENTER para seleccionar Photo. Se muestran los archivos JPEG y las carpetas existentes. Pulse los botones ▲/▼/◄/► para seleccionar un archivo y pulse el botón ENTER. Si se pulsa el botón sobre el icono de una foto, la foto seleccionada se muestra en pantalla completa.
  • Page 153 Ampliación de imagen Después de cambiar al modo WISELINK, seleccione un dispositivo de memoria que tenga instalado. (Consulte la página 65 .) Pulse el botón ENTER para seleccionar Photo. Se muestran los archivos JPEG y las carpetas existentes. Pulse los botones ▲/▼/◄/► para seleccionar un archivo y pulse el botón ENTER. Si se pulsa el botón sobre el icono de una foto, la foto seleccionada se muestra en pantalla completa.
  • Page 154: Uso De La Lista De Música (Mp3)

    Uso de la Lista de Música (MP3) Los archivos MP3 guardados en la memoria del dispositivo se pueden reproducir de varias maneras. Después de cambiar al modo WISELINK, seleccione un dispositivo de memoria que tenga instalado. (Consulte la página 65.) Pulse los botones ◄...
  • Page 155: Uso Del Menú De Configuración

    Uso del menú de configuración Configuración muestra al usuario la configuración del menú WISELINK. Después de cambiar al modo WISELINK, seleccione un dispositivo de memoria que tenga instalado. (Consulte la página 65.) Pulse los botones ◄ o ► para seleccionar Setup y pulse el botón ENTER. Aparece el menú...
  • Page 156: Apéndice

    Identificación de problemas Si cree que el televisor tiene un problema, compruebe primero esta lista de posibles problemas y soluciones. Si ninguno de los consejos funciona, póngase en contacto con el centro técnico de Samsung autorizado más cercano. Problema Posible solución Mala calidad de imagen.
  • Page 157: Sustitución De La Lámpara

    El tipo de lámpara se indica en el lado derecho del TV. También se indica en la caja de la lámpara. ● Después de comprobar el código de la lámpara, facilite el código a la tienda en la que adquirió el TV o al Centro de Servicio técnico de Samsung. Precaución ●...
  • Page 158: Limpieza Y Mantenimiento Del Tv

    Separe la lámpara del aparato sujetando el asa y tirando hacia fuera. ➢ ● Asegúrese de que la lámpara de repuesto sea del mismo modelo. ● Después de sustituir la lámpara, alinee la cubierta de la lámpara con la ranura y apriete el tornillo.
  • Page 159: Especificaciones Técnicas

    Especificaciones técnicas Las descripciones y las características de este folleto se facilitan con fines informativos solamente y están sujetas a modificación sin previo aviso. Nombre del modelo HL-T5076S HL-T5676S HL-T6176S Tamaño de pantalla (diagonal) 50 pulg. 56 pulg. 61 pulg. Consumo eléctrico 230 W Resolución del PC...
  • Page 160 Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Contacte con SAMSUNG WORLD-WIDE Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente.

This manual is also suitable for:

Hl-t5076sHl-t5676s

Table of Contents