Connecting A Vcr - Samsung HL-T5055W Owner's Instructions Manual

Connecting a VCR
Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the
instructions on pages 10~11), Skip step 1 if you have not yet connected to an antenna or a cable system,
1 Unplug the cable or antenna from the
rear of the TV
2 Connect the cable or antenna to the
ANT IN terminal on the back of the
VCR.
3 Connect anAntenna Cable between
the ANT OUT terminal on the VCR
and the ANT I IN(CABLE) orANT 2
IN(AIR) terminal on the TV.
4 Connect a Video Cable between the
VIDEO OUT jack on the VCR and
theAV IN 1 [VIDEO] (orAV
IN 2 [VIDEO]) jack on the TV.
6 Connect Audio Cables between the
AUDIO OUT jacks on the VCR and
theAV IN 1 [L-AUDIO-R] (orAV
IN 2 L-AUDIO-R) jacks on the TV.
_- If you have a "mono" (non-stereo)
VCR, use a Y-connector (not
supplied) to hook up to the right
and left audio input jacks of the TV.
If your VCR is stereo, you must
connect two cables.
\\
TV Rear Panel
>_ Each VCR has a different panel configuration.
_- When connecting a VCR, match the color of the connection terminal to the cable.
S=Video Connection
Your 8amsung TV can be connected to the 8=Video jack of a VCR.
(This connection delivers a better picture when compared to the regular Video connection above.)
1 To begin, follow steps 1-3 in the
previous section to connect the
antenna or cable to your VCR and
your TV.
2 Connectan S-Video Cable between
the S-VIDEO OUT jack on the VCR
and theAV IN I [S-VIDEO] (orAV
IN 2 [S-VIDEO]) jack on the TV.
3 Connect Audio Cables between the
AUDIO OUT jacks on the VCR and
theAV IN 1 [L-AUDIO-R] (orAV IN 2
[L-AUDIO-R]) jacks on the TV.
VCR
TV Rear Panel
_-- Each S-VHS VCR has a different panel configuration.
_-_ When connecting a VCR, match the color of the connection terminal to the cable.
_- Some games may be displayed with a cut off picture when the TV is connected to a game player.