Enabling And Disabling Parksense; Service The Parksense Rear Park Assist System - Dodge 2016 Dart Owner's Manual

262 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Enabling And Disabling ParkSense

ParkSense can be enabled and disabled using the
Uconnect System. The available choices are: Off, Sound
Only, or Sound and Display. Refer to "Uconnect Settings"
in "Understanding Your Instrument Panel" for further
information.
When the ParkSense button is pushed to disable the
system, the Driver Information Display (DID) will dis-
play the "PARKSENSE OFF" message for approximately
five seconds. Refer to "Driver Information Display (DID)
" in "Understanding Your Instrument Panel" for further
information. When the shift lever is moved to REVERSE
and the system is disabled, the DID will display the
"PARKSENSE OFF" message for as long as the vehicle is
in REVERSE.

Service The ParkSense Rear Park Assist System

During vehicle start up, when the ParkSense Rear Park
Assist System has detected a faulted condition, the
instrument cluster will actuate a single chime, once per
ignition cycle, and it will display the "PARKSENSE
UNAVAILABLE WIPE OFF REAR SENSORS" or the
"PARKSENSE UNAVAILABLE SERVICE REQUIRED"
message. Refer to "Driver Information Display (DID)" for
further information. When the shift lever/gear selector is
moved to REVERSE and the system has detected a
faulted condition, the DID will display the PARKSENSE
UNAVAILABLE WIPE OFF REAR SENSORS
PARKSENSE UNAVAILABLE SERVICE REQUIRED
message for as long as the vehicle is in REVERSE. Under
this condition, ParkSense will not operate.
If "PARKSENSE UNAVAILABLE WIPE OFF REAR SEN-
SORS" appears in the Driver Information Display (DID)
make sure the outer surface and the underside of the rear
fascia/bumper is clean and clear of snow, ice, mud, dirt
or other obstruction and then cycle the ignition. If the
message continues to appear, see an authorized dealer.
or