Operation - Dodge 2016 Dart Owner's Manual

Operation

Voice commands can be used to operate the Uconnect
Phone and to navigate through the Uconnect Phone
menu structure. Voice commands are required after most
Uconnect Phone prompts. You will be prompted for a
specific command and then guided through the available
options.
• Prior to giving a voice command, one must wait for the
beep.
• For certain operations, compound commands can be
used. For example, instead of saying "Setup", "Device
Pairing" and then "Pair a Device", the following
compound command can be said: "Setup", "Device
Pairing" and "Pair a Bluetooth Device".
• For each feature explanation in this section, only the
compound form of the voice command is given. You
can also break the commands into parts and say each
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137
part of the command when you are asked for it. For
example, you can use the compound form voice com-
mand "Phonebook New Entry", or you can break the
compound form command into two voice commands:
"Phonebook" and "New Entry". Please remember, the
Uconnect Phone works best when you talk in a normal
conversational tone, as if speaking to someone sitting a
few feet/meters away from you.
Voice Command Tree
Refer to "Voice Tree" in this section.
Help Command
If you need assistance at any prompt, or if you want to
know your options at any prompt, say "Help" following
the beep. The Uconnect Phone will then play some of the
options.
3