Baby Lock Ovation Accessories Manual page 10

COVERSTITCH:
MACHINE SETTINGS
Stitch type: Triple Cover Stitch or Wide Cover Stitch
Needles: Triple Cover Stitch-C1,C2,C3 Wide
Cover Stitch-C1,C3
Stitch length: 4
Stitch width: M
Differential feed: Normal
Upper knife: Disengaged "LOCKED"
Sewing table: Remove knife cover and snap on sewing
table
Sewing speed: Slow
tension adjuster screw
elastic tape
Elastic Foot
(BLE8-EF)
Instructions
INSERTING FISHING LINE uSING THE ELASTIC FOOT:
MACHINE SETTINGS
1. Thread your serger for a 3-thread rolled edge using
2. Slide the fishline through the guide holes on the right side of
3. Snap the foot on the machine and place the fabric under the
4. Begin serging making sure the fishline is caught in the
5. When you have finished serging, carefully remove the fabric
www.babylock.com
(continued)
Stitch type: 3-Thread Rolled Hem
Needle: 02
Stitch selector: D
Stitch width: 5.0
Stitch length: 1.5R (Rolled hem setting)
Differential feed: 0.6
Upper knife: Engaged "Unlocked"
Sewing speed: Slow
decorative threads in the upper looper.
the elastic foot and then under the back of the foot leaving a
3" to 4" tail in the back.
foot with the fishline to the right of the needle.
stitching as the edge is being rolled.
and fishline from under the presser foot being careful not to
pull the fishline out of the seam.