Beading Foot (BLE8-BF) Instructions Serge pearls, piping, cording, and more to the edge of fabric with ease and speed. This one-step foot will give all of your surface embellishments a professional finish. MACHINE SETTINGS Stitch type: 3-Thread Rolled Hem 1. Remove the left needle from the machine. Set machine to Stitch selector: narrow rolled hem (Refer to your instruction manual for Needle:...
Page 3
Belt Loop Binder 3/4 inch (19mm) (BLE8-S12) 1-1/2 inch (38mm) (BLE8-S11) Instructions Easily create straps, drawstrings, decorative trim, purse handles and of course, belt loops. This binder takes all of the work out of bias strips by folding and pressing them for you. Choose from 3/4”...
Blindhem Foot (BLE8-BLHF) Instructions Looking for a quick, easy way to make your hems invisible? This foot was designed specifically for easily stitching a blindhem on the serger. You can also use this foot for quick stitching along fabric edges. MACHINE SETTINGS Needle: Upper knife:...
Page 5
Use this foot for better visibility when attaching ribbon and lace, or guiding lightweight decorative stitching. The raised guidelines on the foot ensure that you stitch with accuracy. This foot is perfect for decorative construction and the Baby Lock exclusive Wave Stitch. MACHINE SETTINGS...
Page 6
Cover/Chain Stitch Foot (BLE8-CCF) Use the Cover/Chain Stitch foot for better visibility and easier control for stitching curves or turning tight corners and attaching tape and ribbons. 5. Lower the presser foot. MACHINE SETTINGS: 6. Turn the handwheel toward you to form Stitch: Left, right or center chain stitch, narrow, wide or triple 2 or 3 stitches.
Page 7
Curving Foot (BLE8-CVF) Instructions The Curve Foot is short and has a flat sole, making it a good choice for stitching curves and sewing over cross seams. Its short size is also good for sewing around cuffs, necklines and children’s wear using the cover stitches. MACHINE SETTINGS: Most stitching applications can be used (select one and check with instruction book for length and width setting for specific stitch...
Page 8
Double Fold Bias Binder 1-1/8 inch (28mm) (BLE8-S3) 1-1/2 inch (36mm) (BLE8-S2) Instructions This conventional binder will double fold and sew bias strips to your project in one quick step, using either a chain Instructions: or coverstitch. Choose from two widths based on your 1.
Elastic Foot (BLE8-EF) Instructions Confidently serge elastic by letting this foot take care of all the work. This foot provides even pressure on the elastic every time to prevent pulling and tugging on the needles. The adjustable guide and tension dial allow you to serge elastic with a finished uniform stretch.
Page 10
Elastic Foot (BLE8-EF) Instructions (continued) COVERSTITCH: INSERTING FISHING LINE uSING THE ELASTIC FOOT: MACHINE SETTINGS MACHINE SETTINGS Stitch type: Triple Cover Stitch or Wide Cover Stitch Stitch type: 3-Thread Rolled Hem Needles: Triple Cover Stitch-C1,C2,C3 Wide Needle: Cover Stitch-C1,C3 Stitch selector: Stitch length: Stitch width: Stitch width:...
Page 11
Lace Applicator Foot (BLE8-LF) Instructions Use this foot for guiding lace onto your fabric with a 2-thread flatlock or to attach ribbon to your fabric under a cover stitch. Or attach decorative trim by combining an overlock stitch with a chain stitch. Follow your “Quick Reference Threading Guide” for various stitches and settings.
Page 12
pintuck Foot (BLE8-pTF) Instructions Use this foot on your serger to add beautiful texture to a classic heirloom or everyday garment. The groove on this foot allows for perfect spacing with professional results. Achieve precise pintucking when making corded and hollow tucks as well as parallel and curved forms.
piping/Cording Foot (BLE8-CF) Instructions Use this 5mm foot to create decorative stitching over cording on single and double layers of fabric. Attaching decorative cords and thread is a snap. This foot eliminates tangling to ensure that cords up to 5mm lie flat and perfectly parallel to each other. The cording foot controls threads so both hands can guide the fabric.
Page 14
plain Hemmer Foot (BLE8-S6) 1/2 inch (13mm) Instructions Guide fabric into a perfectly straight hem without any pre- project pressing. The plain hemmer is designed to be used for straight hemming only. Leave one seam of the garment open. After hemming, sew the seam closed. Instructions: 1.
Page 15
plain Hemmer Foot 1/4 inch (6.5mm) (BLE8-S7) Instructions Guide fabric into a perfectly straight hem without any pre- project pressing. The plain hemmer is designed to be used for straight hemming only. Leave one seam of the garment open. After hemming, sew the seam closed. Instructions: 1.
Quilt Guide (BLES8-QG) Instructions The quilt guide is great for aligning exact rows of parallel cover or chain-stitching that are equally spaced. INSTRuCTIONS: 3. Tighten the quilt bar fixing screw. 1. Insert the stem of the quilt bar into the hole at the rear of the presser foot bar.
Ruffling Foot (BLE8-RF) Instructions Easily make and attach ruffles as well as finish your edge in one simple step. Add perfectly spaced ruffles to garments, pillows, and other home décor items. This ruffling foot works on all fabric types. Note: Gathering works the best with fine fabrics. The MACHINE SETTINGS heavier the fabric the less the gathering.
Page 18
Single Fold Bias Binder 1-1/8 inch (28mm) (BLE8-S4) 1-5/8 inch (40mm) (BLE8-S5) Instructions This conventional binder will double fold and sew bias strips to your project in one quick step on the serger, using either a Instructions: chain or cover stitch. Choose from two widths based on your 1.
Page 19
Single Downturn Feller 1/4 inch (6.5mm) (BLE8-S10) 5/8 inch (16mm) (BLE8-S8) 1 inch (25mm) (BLE8-S9) Instructions This single downturn feller turns the fabric downward into Attachment Instructions: Make sure the attachment is in the a perfectly straight single turn hem. You won’t have to front and the center screw positions of the mounting bracket to press your hems before using this feller, making downturn avoid being too close to the toe of the presser foot.