Basic Functions; Making A Call - Geemarc Serenities User Manual

Basic Functions

Making a Call

1. To make a call, lift the handset, listen for a dial tone and adjust
your volume & tone settings
2. You can dial a number manually or press one of the memory
dial buttons. Please refer to
3. To end the call, replace the handset on the base.
You can enter the desired phone number in standby mode, which
allows you to make corrections before dialing. Follow these steps:
1. Enter a telephone number (up to 32 digits). Check it. If you
make a mistake while entering a number, press the Clear soft
key to edit it.
2. When the number appears correctly, lift the handset or press
the
Last Number Redial
The key is used to quickly redial the last number you dialed.
1. Lift the handset to get a dial tone.
2. Press the
automatically.
Dialing a Number from the Redial List
1. Press the
2. Press
you want to dial.
3. Pick up the handset or press the
number.
key.
key. The phone will redial up to 32 digits
key in standby mode.
keys repeatedly until you find out the number
(see page 15).
page 18.
key to dial out the
13