Video - Magnavox ZV450MW8A Owner's Manual

Video

SOURCE DTV/TV
.@/:
1
GHI
4
PQRS
7
.
DISC MENU
s s
TITLE
j
F
--
REC MODE
Press [STOP C] if you are playing back a disc.
1
Press [SETUP] and use [K / L] to
select "General Setting", then press
[OK].
2
Use [K / L] to select "Video", then
press [OK].
3
Use [K / L] to select a desired item,
then press [OK].
1
Progressive Scan
2
TV Aspect
3
Video Input
Submenu will appear.
4
Refer to 1 to 2 on this page and set
the selected item.
3
• For refer to page 47.
5
When you finish with setting, press
[SETUP] to exit.
88 88 EN EN
SETUPS
STANDBY-ON
DISPLAY OPEN/CLOSE
A
ABC DEF
2 3
JKL MNO
5 6
TUV WXYZ
8 9
SPACE CLEAR
0
SETUP SETUP
o o
OK OK
B B
RETURN
p p
B i i
h g C
C
CHANNEL
+
VCR DVD TIMER
1
Progressive Scan (Default : OFF)
This unit is compatible with the progressive scan system.
The feature provides you with the higher definition
images than the traditional output system does. To utilize
this feature, you must set progressive scan mode to "ON".
1) Use [K / L] to select "ON", then press [OK].
Progressive Scan
ON
OFF
2) Use [{ / B] to select "Yes", then press [OK].
Activating progressive scan:
Check your TV has progressive scan
and connect with component video cable.
NOTE :
If there is no picture or picture is
distorted after selecting
Wait about 15 seconds for auto recovery.
Activate?
3) Use [K / L] to select "Yes" within 15 seconds, then
press [OK].
Your setting will be activated.
Note
• If your TV is compatible with progressive scan (525p /
480p), you are recommended to use the component
video cable (commercially available) to connect this
unit to the TV. (Refer to "Method 2" on page 18.) If
not, use the RCA video cable and set the progressive
scan to "OFF" or press and hold [SETUP] for more
than 3 seconds during DVD playback.
• When selecting "No" or not pressing any buttons on
the unit or remote control within 15 seconds at step 3,
progressive scan remains to be "OFF" (interlace scan).
2
TV Aspect (Default: 4:3 Letter Box)
You can select the TV aspect ratio to match the formats of
what you are playing back with the unit and your TV
screen (4:3 standard or 16:9 widescreen TV).
Use [K / L] to select a setting, then press [OK].
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
If you have a standard TV:
Select "4:3 Letter Box", so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select "4:3 Pan & Scan" for a full
height picture with both sides trimmed when playing
back wide-screen picture.
If you have a widescreen TV:
Select "16:9 Wide".
"Yes",
Yes No