Hints For Timer Recording - Magnavox ZV450MWB Owner's Manual

Hints for Timer Recording

• If there is a power failure or this unit has been unplugged
for more than 30 seconds, the clock setting and all timer
programming will be lost.
• If a disc is not inserted, "DVD" on the front panel display
flashes and timer recording cannot be performed. In some
cases, will appear momentarily around the start point as
the unit attempts to record. Please insert a recordable disc.
• If a cassette tape with a erase-protection tab is not in the
cassette compartment or there is no cassette tape in the
cassette compartment, "VCR" on the front panel display
flashes and timer recording cannot be performed. Please
insert a recordable cassette tape.
• If you press [TIMER SET] and turn on the unit while either
DVD or VCR is in timer standby mode,
case, you cannot change the mode between DVD and VCR.
You cannot change any settings using [SETUP] or edit discs.
• When all the timer recording is completed,
play back or eject the recorded disc, press [TIMER SET] first,
then select the recorded title and press [PLAY B], or
[OPEN/CLOSE A] to remove the disc.
• If both DVD and VCR are timer programmed, you cannot
use any functions for either unit during timer standby or
timer recording. If you want to use functions other than
The Priority of Overlapped Settings
This unit records the programs according to priority if the timer programmings are overlapped. The timer
programming set previously has priority.
A timer recording of lower priority will be canceled, start from the middle or stop on the way.
Check the overlapped timer programmings and change the priority if necessary.
When the starting time is the same:
A program set previously (PROG. A) has priority.
PROG. A
PROG. B
actual
recording
The first 2 minutes (at the longest) will be cut off.
When the recording time is partially overlapped:
PROG. A will start after PROG. B is complete to
be recorded.
PROG. A
PROG. B
actual
recording
The first 2 minutes (at the longest) will be cut off.
Note for DVD recording
• When the recording time of 2 programs are overlapped, or
the end time of a program and the start time of another
program is the same, the first 2 minutes (at the longest) of
the subsequent program will be cut off.
• If the cut-off portion comes up to 1 minute or more, this
program will be displayed with error number E40 in the
timer programming list.
40 40 EN EN
E9C80UD.indd 40 E9C80UD.indd 40
TIMER RECORDING
disappears. In this
flashes. To
PROG. A PROG. A
PROG. B
PROG.B PROG.A
recording under such condition, cancel timer recording by
pressing [TIMER SET] during timer standby or stop
recording by pressing [STOP C] on the front panel during
timer recording.
• To cancel the timer standby mode, press [TIMER SET].
• When the starting and the ending time are the same, the
length of the recording will be set for 24 hours. When the disc
or cassette tape becomes full during the recording, the unit
turns itself off.
• When the programmed starting and ending time are earlier
than the current time, the setting will not be accepted and
be cleared for redoing.
• If the starting time is earlier and the ending time is later
than the current time, the recording will start right after you
turn the power off.
• The timer recording for digital TV cannot record any audio
language other than English.
• The timer recording cannot be performed in DVD and VCR
at the same time. If you set two programming with the
same channel and time in both devices, the program with a
lower program number will be recorded.
When some programming have been made at
the end time of the programming currently
being recorded:
A program set previously (PROG. B) has priority.
PROG. A
PROG. B
PROG. C
actual
PROG. A
recording
The first 2 minutes (at the longest) will be cut off.
When the recording time is entirely overlapped:
PROG.A will not be recorded.
PROG. A
PROG. B
actual
PROG. B
recording
When the end time of the programming
currently being recorded and the start time
of the subsequent program are same:
If PROG. A is a DVD recording program, the
beginning of the PROG. B may be cut off.
PROG. A
PROG. B
actual
PROG. A
recording
The first 2 minutes (at the longest) will be cut off.
PROG. B
PROG. B
2006/12/19 14:03:16 2006/12/19 14:03:16