Display - Magnavox MDV456/17 Owner's Manual

E6170UD_EN_QX4_1217 12/17/04 5:44 PM Page 41
Instructions continued from previous page
●
If you selected STILL MODE, press K or L to select a
setting, then press OK. This determines the quality of an
image in still mode.AUTO is the default setting.
If you select FIELD, still images will be stabilized but
coarse due to the small amount of data.
If you select FRAME, the images will be highly defined due
to the simultaneous output of two fields.

DISPLAY

STILL MODE
AUTO
FIELD
FRAME
OK
STILL MODE
5
Press SETUP to remove the menu.
Display (cont'd) 41
5
4