Using An Accessory Rf Modulator - Magnavox MDV437 User Manual

RF coaxial cable to TV
INT IN TO TV VIDEO
IN
AUDIO OUT COAXIAL
IMPORTANT!
– If your television only has a single
Antenna In jack (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the
DVD playback on the television. See
your electronics retailer for details
on RF modulator availability and
operations.

Using an accessory RF modulator

A
Use the composite video cable (yellow)
to connect the DVD player's TV OUT
(CVBS) jack to the video input jack on
the RF modulator.
B
Use the RF coaxial cable (not supplied) to
connect ANTENNA OUT or TO TV jack
on the RF modulator to the ANTENNA
IN jack on the television.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
01-43_MDV437_37_eng.indd 11 01-43_MDV437_37_eng.indd 11
Back of RF Modulator
(example only)
A UDIO IN
R L
CH3 CH4
1
DIGIT AL
OUT TV OUT
COMPONENT VIDEO OUT
Connections
C
To hear sound of this DVD player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD player to the
corresponding AUDIO IN jacks on the
RF modulator (cable supplied).
D
Connect the Antenna or Cable TV
service signal to the ANTENNA IN or RF
IN jack on the RF modulator. (It may
have been connected to your TV
previously. Disconnect it from the TV).
(continued)
11
2007-01-31 4:49:46 PM 2007-01-31 4:49:46 PM