Advertisement
After installing
the batteries
(see
page 6) into the remote,
press the
TV System button to send remote
commands
to the TV. Point the
remote toward the front of the TV
(remote sensor window ) when
pressing buttons.
V(_R Buttons
For use of VCR buttons see the "Using
the Remote With a VCR" section on
page 19.
Status/Exit
Button
Press to see the current channel
number on the TV screen. Also press
this button to clear the TV screen after
control adjustments.
1Vlgno Button
Press the M button to show on-screen
controls. Press Channel • or •
buttons to move through the list of
controls. Press the Volume (+, -)
buttons to adjust the MENU controls.
Mute Button
Press to turn the sound OFF on the
TV. Press again to return the sound to
its previous level.
TV-VCR Button
Press to the VCR position ("VCR"
indicator on the VCR will light) to
view the playback of a tape. Press
again to place in the TV position
("VCR" indicator on the VCR will go
OFF) to view one program while
recording another program.
TV-VCR-CBL
System
Button_
Press to send remote control commands
to either the TV, VCRs, or accessory
Cable Conveners. See the "How to
operate VCRs and Cable Converters"
section for further details.
gtlml!_'liIl_l
The remote's TV-CBL-VCR
System buttons control how
buttons on the remote are used.
--
Channel
_;ean Button
Press to scan up or down through
channel numbers.When used with the
MENU button, press to adjust the
selected on-screen (MENU) feature
controls.
Power Button
Press to turn TV ON and OFF.
Volume
(-) and (+) Buttons
Press to adjust the TV sound level.
When used with the MENU button,
press to adjust the selected on-screen
(MENU) feature controls.
_;urf Button
Press to select previously viewed
channels. For example: You are
watching channel 4 and change to
channel 10 (using the channel number
buttons). Press SURF and your TV
will returnto channel 4. Press SURF
again and your TV will return to
channel 10. Turn to page (21) to see
how the "SURF" control is used to
quickly select a series of channels.
Number Buttons
Press tw___QO
number buttons to select
TV channels. For example: to select
channel 6... press "0"first; then "6".
_;mart Button
Press to select automatic settings for
TV Picture and Sound. Smart Picture
for factory preset video levels on a
variety of program sources. Smart
Sound to control TV sound levels
during program changes or
commercial breaks. See page (24) for
details.
With the "TV" system button
pressed, the Menu, (M)A•,
and
(+,-) buttons are used to select and
adjust on-screen TV features.
With the "CBL" system button
pressed:the Power, Channel
Number, and CH UpAi /Down y
buttons on work with Converters.
With the "VCR" system button
pressed, the Menu, (M)••,
and
(+,-)buttonsworkStop,Play,
and other VCR features.
18
Advertisement
