Advertisement
uto Progranmting (see
previous page) adds all the
channels it can find (on your
Antenna or Cable TV system) into
the TV's memory. Add/Delete
Channels makes it easy for you to
add other channels, or drop
unwanted channels, from the list of
channels in the TV's memory.
Press the MENU (M) button
on the remote, then press the
CHANNEL • or • buttons (or
the MENU • or • buttons on the
TV) to select the word CHANNEL
with the TV's on-screen Arrow.
_' ,_ Press CHANNEL Number
buttons on the remote (or Channel
• • on the TV) to select the
channel you want to SAVE (or
ELETE.)
Press VOLUME (+) button to
SAVE the selected channel
number into memory.
Press VOLUME (-) button to
DELETE a channel from memory.
_
Press the STATUS button to
clear the screen after adding all the
channels you want.
'l'ry it out. Press tile
CHANNELA•
buttons.
The channels you SAVED should
appear. The channels you
DELETED should not appear.
Remember, you can also add the
VCR/AUX mode (see page 17)
into the TV's channel memory.
Then by pressing the CH • •
buttons you can quickly select the
Audio/Video Input jacks on the
rear of the TV. Just "SAVE" the
VCR/AUX mode (located between
the lowest and highest channel
numbers) into the TV's memory.
If you need
to SAVE
(or DELETE)
a
channel
above
100, use the CH&V
buttons
on the TV. The remote
control
number
buttons
can select
only
up to
channe
99.
10
Advertisement
