Advertisement
MAINTENANCE
WARNING
Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire,
electric shock or damage to persons.
LIGHT BULB REPLACEMENT
Allow at least 5 minutes for light bulbs to cool off before touching bulbs to avoid accidental
burning of skin.
Light bulbs need to be replaced when you notice a dark section of the flame or when the clarity
and detail of the log exterior disappears. There are four bulbs under the log set which
generate the flames and embers and two bulbs above the log that illuminate the log exterior.
LOWER LIGHT BULB REQUIREMENTS
Quantity of 4 clear chandelier or candelabra bulbs with an E-12 (small) socket base, 60 watt
rating.
LOWER LIGHT BULB REPLACEMENT
The lower light bulbs are located at the back of the fireplace under the logset. To access the
lower light bulbs, grasp the back of the plastic emberbed and firmly pull the emberbed forward
and up until the rear tab clears the back ledge. Handle the logset by the under side and place
it out of the way, pull the rotating flicker aside and replace the required bulbs lower light bulbs.
Re-assemble in the reverse order.
CAUTION: Grasping the logset by the logs or the grate when removing the logset may result
in damaging the logset.
8
Hide quick links:
Advertisement
