Kenwood DDX6015BT Instruction Manual page 53

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
Connecting wires to terminals for Toyota Cars (for DDX615WBT/DDX615WBTM)
10 A fuse
See page 54.
1
Blue with white stripe
*
(Power control wire)
Brown (Mute control wire)
* If no connections are made, do not let the cable come out from the tab.
6
See page 54.
USB terminal (0.8 m): See page 54.
Connect the antenna cord to
the antenna terminal.
Purple with white stripe (Reverse sensor wire)
Light green (Parking sensor wire)
When using the optional power amplifier, connect to
its power control terminal.
Not used.
Connector B
Connect to vehicle's harness.
Connect to vehicle's harness.
Connector A
C6 C7 C8
Connector C
See page 54.
Pin Color and functions of Connector A, B, and C
A1 Orange/White
A2 Yellow
A4 Red
A5 Blue
A6 Black
White ª / White/Black ·
A8/A7
A10/A9 Gray ª / Gray/Black ·
Green ª / Green/Black ·
B2/B1
Purple ª / Purple/Black ·
B6/B5
C6 Gray/Red
C7 Light green/Red
C8 Purple/Red
Connect to the vehicle's steering remote harness.
• Depending on the type of vehicle, it cannot be
connected.
Connect to the vehicle's reverse lamp
harness when using the optional rear view
camera.
Connect to the vehicle's parking
3 brake detection switch harness.
• For best safety, be sure to connect
the parking sensor.
Dimmer
Battery
Ignition (ACC)
Antenna control
Ground connection
Left speaker (front)
Right speaker (front)
Left speaker (rear)
Right speaker (rear)
Ground
Input 1
Input 2
ENGLISH 53