Using The Bluetooth Audio Player - Kenwood DDX6015BT Instruction Manual

BLUETOOTH BLUETOOTH
Setting items
<Phone Shows the connected phone device
Device> name.
<Auto • ON: The unit answers the incoming
Response>
calls automatically in 5 seconds.
• OFF (Initial): The unit does not
answer the calls automatically.
Answer the calls manually.
<SMS • ON : The unit informs you of the
Notify>
arrival of a message by ringing and
displaying "Receiving Message".
• OFF (Initial): The unit does not
inform you of the arrival of a
message.
<Ring • System (Initial): The ring tone set on
Mode> the unit is used.
• Phone: The ring tone set on the
mobile phone is used. (This function
may not work depending on the
mobile phone.)
<Ring Tone When <Ring Mode> is set to
Change> <System>, press [Enter], then select
the ring tone for received calls and
SMS from <Tone1> (Initial), <Tone2>,
<Tone3>.
• Call Tone: Selects the ring tone for
phone calls.
• Message Tone: Selects the ring
tone for SMS.

Using the Bluetooth audio player

• To register a new device, see page 30.
• To connect/disconnect a device, see page 32.
Indications and buttons on the source
control screen
1
4
• The operation buttons, indications and
information displayed on the screen differ
depending on the connected device.
Playback information
1 Playback status*
2 Playing time*
3 Tag data (current track title/artist name/album
title)*
• Pressing [<] scrolls the text if not all of the text
is shown.
4 The signal strength and battery level (only when
the information is acquired from the device)
Operation buttons
[S] [T]
[I]
[W]
[MENU]
* Available only for devices compatible with AVRCP 1.3.
2 3
• Selects a track. (Press)
• Reverse/forward search.* (Hold)
Starts playback.
Pauses playback.
Displays the <TOP MENU> screen.
ENGLISH 37