Settings menu
Temperature
You can set whether the temperature
should be displayed in °C/Celsius or °F/
Fahrenheit.
The factory default setting is °C.
Select the option you want and con‐
firm with
.
OK
Brightness
There are seven different display bright‐
ness settings.
Select the brightness you want and
confirm this with
62
.
OK
Volume
A sequence of buzzer tones will sound
at the end of the program or if there is a
fault as long as the buzzer has been ac‐
tivated.
Buzzer in the event of a fault
The buzzer in the event of a fault will
sound four times at intervals with a
short pause between each set of tones.
The buzzer which sounds when there
is a fault cannot be deactivated.
Buzzer at the end of a program
The buzzer at the end of a program will
sound four times at intervals with a
short pause between each set of tones.
Buzzer tones
The volume of the tone at the end of
the program can be selected in seven
stages or switched off.
Select the volume you want using the
and
Quieter
Louder
buzzer off.
Confirm with
OK
Night time buzzer tone
You can select a different volume for
the buzzer at night, or turn it off.
Select the volume you want for the
night time buzzer using the
and
options, or switch the
Louder
night-time buzzer off.
Confirm with
OK
options, or turn the
.
Quieter
.