Rinse Aid; Sensorwash; Autoopen - Miele G 6910 Operating Instructions Manual

Rinse aid

You can adjust the rinse aid dosage for
best results.
The rinse aid dosage is set in stages
from 0 to 6.
It is set to 3 at the factory.
The rinse aid dosage can turn out to be
higher than the set value due to the au‐
tomatic adjustment of the
program.
If spots appear on dishware and glass‐
ware:
– Increase the rinse aid dosage.
If clouding or smearing appears on
dishware and glassware:
– Decrease the rinse aid dosage.
 Select the desired setting with
and confirm with
Sensor Wash
+/-
.
OK

SensorWash

You can adjust the
gram so that it will remove stubborn
soiling in a lightly soiled load.
 Select the setting you want and con‐
firm with .
OK

AutoOpen

At the end of programs with a drying
phase (except
Extra Quiet
open automatically a little in order to
help the drying process (see "Program
overview").
In the program (depending on
ECO
mode), the door will open automatically
during the drying phase.
This function can be deactivated if
wished.
 Select the setting you want and con‐
firm with .
OK

If you have deactivated the auto‐
matic door opening function and
would like to open the door as soon
as the program has finished, make
sure that you open the door fully.
Otherwise steam from the dishwash‐
er could damage the edge of the
counter because the fan is no longer
running.
Settings menu
pro‐
Sensor Wash
), the door will
59