Automatic Program - Magnavox 20MT1336 User Manual

Y Y Y Y Y
ou can auto install programs on your TV ou can auto install programs on your TV
when the when the CH+ or CH– buttons are pressed. CH– buttons are pressed. CH–
NOTE : Ensure that the Antenna or Cable signal
connection has been completed before AUTO
PROGRAM is activated.
1
Press the MENU button on the remote
control to show the on-screen menu.
2
Press the CURSOR < or > to scroll
through the on-screen menu until the word
INSTALL is highlighted.
3
Press the CURSOR > to display the
INSTALL menu features.
4
Press the CURSOR < or > to scroll
through the Install features until the word
AUTO PROGRAM is highlighted.
5
Press CURSOR > to start the Auto
Program scanning of channels. Auto
Programing will store all available channels
in the TV's memory then tune to the lowest
available channel when done.
6
. When finished, press the STATUS /
EXIT button on the remote control to
remove the menu from the TV's screen.
H
When CABLE is selected, channels 1 - 125 are
available.
When ANTENNA is selected, channels 2 - 69 are
available.
When AUTO is selected, the TV will
automatically set itself to the correct mode based
on the type of signal it detects.

AUTOMATIC PROGRAM

. This makes it easy for you to select only the TV stations in your area
STATUS / EXIT
< >
MENU
H
ELPFUL INTS
CC
A/CH
STATUS
EXIT
SLEEP MUTE
12
Channel Edit
58
59