Memory Position Recall - Dodge 2016 Grand Caravan Owner's Manual

218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
NOTE: Before programming your RKE transmitters you
must select the "RKE Linked To Memory" feature
through the Electronic Vehicle Information Center
(EVIC). Refer to "Electronic Vehicle Information Center
(EVIC) " in "Understanding Your Instrument Panel" for
further information.
To program your RKE transmitters, perform the follow-
ing:
1. Cycle the vehicles ignition to the OFF position.
2. Select a desired memory profile (1) or (2).
NOTE: If a memory profile has not already been set, refer
to Programming The Memory Feature in this section for
instructions on how to set a memory profile.
3. Once the profile has been recalled, push and release
the SET (S) button on the memory switch.
4. Push and release button (1) or (2) accordingly.
"Memory Profile Set" (1 or 2) will display in the
instrument cluster.
5. Push and release the LOCK button on the RKE trans-
mitter within 10 seconds.
NOTE: Your RKE transmitters can be unlinked to your
memory settings by pushing the SET (S) button, and
within 10 seconds, followed by pushing the UNLOCK
button on the RKE transmitter.

Memory Position Recall

NOTE: The vehicle must be in PARK to recall memory
positions. If a recall is attempted when the vehicle is not
in PARK, a message will be displayed in the EVIC.
To recall the memory settings for driver one, push MEMORY
button 1 on the driver's door or the UNLOCK button on the
RKE transmitter linked to memory position 1.