Preparation; Using The Remote Control F - Sharp LC-20B2UA Operation Manual

PREPARATION
• Use the remote control by pointing it towards the remote sensor window.
Objects between the remote control and sensor window may prevent
proper operation.
Cautions regarding use of remote control
• Do not expose the remote control to shock.
In addition, do not expose the remote control to liquids, and do not place
in an area with high humidity.
• Do not install or place the remote control under direct sunlight. The heat
may cause deformation of the unit.
• The remote control may not work properly if the remote sensor window
of the main unit is under direct sunlight or strong lighting. In such a
case, change the angle of the lighting or LCD TV set, or operate the
remote control closer to the remote sensor window.
,
~
c;Y '
~'.
-:,,:'
'-
If the remote control fails to operate the LCD color TV functions, replace the tiatteries in the remote
control.
1
Open the battery
cover.
• Slide the cover while
pressing down.
2
Insert batteries (two "AAA"
(UM/SUM-4) size batteries,
supplied with product) .
• Place the batteries with their
terminals corresponding to
the (+) and (-) indications in
the battery compartment.
3
Close the battery
cover.
Cautions regarding batteries
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the
instructions below.
- Place batteries with their terminals corresponding to the (+) and (-) indications.
- Different types of batteries have different characteristics. Do not mix batteries of different types.
- Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new
batteries and/or cause old batteries to leak chemicals.
- Remove batteries when they become weak.
Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a
cloth.
- The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
-If the remote control is not used for an extended period of time, remove the batteries from the remote
control.