Initialize - Aztech WIPC410 Enhanced HD User Manual

User Manual

Initialize

 Reboot. Allows you to restart the device. The device reboot will take less than
five minutes to complete.
 Restore Factory Default. Allows you to restart the IP Camera using all of the
default settings it has. By clicking the Confirm button, all changes made on
the IP camera will be replaced by its default settings.
 Backup Settings Data. Allows you to backup all present settings in your IP
Camera.
Restore Settings Data. Allows you to use the previously saved backup file that

you saved. Simply click the browse button, locate the backup file, and click
confirm.
 Firmware Upgrade. Allows you to upgrade the current firmware of your IP
Camera. Simply click the browse button, locate the firmware file, and click
confirm. After the upgrade, the IP Camera will restart with the upgraded
firmware loaded.
NOTE: It is important to ONLY use firmware OFFICIALLY RELEASED by Aztech.
These can
(www.aztech.com/support).
be downloaded on the Aztech Support Site
30