Product At A Glance - Chauvet Freedom Par Quad-4 IP User Manual

Product at a
Glance
Safety Notes
Page 4 of 22
Use on Dimmer
Outdoor Use
Sound-Activated
DMX
Master/Slave
These notes include important information about the mounting, usage, and maintenance of this product;
read before using the product.
·
Always connect the product to a grounded circuit to avoid the risk of electrocution.
·
Always disconnect the product from the power source before cleaning or replacing the fuse.
·
Avoid direct eye exposure to the light source while the product is on.
·
Make sure the power cord is not crimped or damaged.
·
Never disconnect the product from power by pulling or tugging on the cord.
·
If mounting the product overhead, always secure to a fastening device using a safety cable.
·
Make sure there are no flammable materials close to the product when operating.
·
Do not touch the product's housing when operating because it may be very hot.
·
Always make sure that the voltage of the outlet to which you are connecting the product is within the
range stated on the decal or rear panel of the product.
·
This product is for indoor or temporary outdoor use (IP54). Do not expose to harsh or excessively
corrosive environmental conditions (whether indoors or outdoors), including, but not limited to,
extreme temperatures, humidity, atmospheric conditions (including salinity or pressure), radiation (UV,
infrared or nuclear), shock and conditions which exceed the product's Ingress Protection ("IP") rating.
·
Do not submerge this product. This product may be exposed to rain and moisture.
·
Always install the product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
·
Be sure that no ventilation slots on the product's housing are blocked.
·
Never connect the product to a dimmer or a rheostat.
·
Make sure to replace the fuse with another of the same type and rating.
·
Never carry the product from the power cord.
·
The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at higher
temperatures.
·
In the event of a serious operating problem, stop using the product immediately.
·
Never try to repair the product. Repairs carried out by unskilled people can lead to damage or
malfunction. Contact the nearest authorized technical assistance center.
·
This product is not intended for permanent installation.
·
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
Keep this User Manual for future use. If you sell the product to another user, be sure to give this document
to the next owner.
x
Auto Program
P
Auto-Ranging Power Supply
x
Replaceable Fuse
P
User-Serviceable
P
Freedom™ Par Quad-4 IP User Manual Rev. 1
P
P
P
x