5.1.1 Configure SSID and Channel
To configure software Access Point, click the "Config" button, and the "Wireless Network Properties"
will be displayed.
Please note that the Ad-Hoc mode is not available when the wireless adapter is in the Access Point
mode. The setup options are listed below:
Object
Network Name
(SSID)
Channel
To save changes, click "OK"; otherwise, click "Cancel" to discard changes.
Description
Please input the SSID (the name used to identify this wireless
access point) here. Up to 32 numerical characters can be accepted
here, excluding space.
Please select the wireless channel you wish to use, from 1 to 13.
-54-
300Mbps 802.11n Wireless USB Adapte
r
WNL-U556M