Wiring Connection - Kenwood KDC-U563BT Instruction Manual

INSTALLATION / CONNECTION

Wiring connection

Front, Rear/subwoofer output
Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis of the car
Battery
22
White
White/Black
Gray
Light blue/yellow
Gray/Black
(Steering remote control
wire)
Green
Green/Black
Brown
Purple
(Mute control wire)
Purple/Black
Red (Ignition wire)
Blue/White
(Power control wire/
Antenna control wire)
Yellow (Battery wire)
Fuse (10 A)
Microphone input jack ( 10)
If no connections are made, do not let the wire come out
from the tab.
To the steering wheel remote
control adapter
To connect the Kenwood
navigation system, refer your
navigations manual
To the power control terminal
when using the optional power
amplifier or to the antenna
control terminal in the vehicle
When connecting to an external
amplifier, connect its ground wire to
the car's chassis to avoid damaging
the unit.
Part list for installation
(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key