Display Settings - Kenwood KDC-U563BT Instruction Manual

AUDIO SETTINGS
PRESET EQ DRIVE EQ/ TOP40/ POWERFUL/ ROCK/ POPS/ EASY/ JAZZ/ NATURAL/
USER: Selects a preset equalizer suitable to the music genre. (Select [USER] to use
the customized settings.)
[DRIVE EQ] is a preset equalizer that reduces noise outside the car or running noise
of the tyres.
BASS BOOST LV1/ LV2/ LV3: Selects your preferred bass boost level. ; OFF: Cancels.
LOUDNESS LV1/ LV2: Selects your preferred low and high frequencies boost to produce a well-
balanced sound at a low volume level. ; OFF: Cancels.
SUBWOOFER SET ON: Turns on the subwoofer output. ; OFF: Cancels.
LPF SUBWOOFER THROUGH: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/ 160HZ: Audio
signals with frequencies lower than 85 Hz/ 120 Hz/ 160 Hz are sent to the subwoofer.
SUB-W PHASE REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer output to be in
line with the speaker output for optimum performance. (Selectable only if a setting
other than [THROUGH] is selected for [LPF SUBWOOFER].)
FADER R15 to F15 (0): Adjusts the rear and front speaker output balance.
BALANCE L15 to R15 (0): Adjusts the left and right speaker output balance.
VOLUME OFFSET For AUX: –8 to +8 (0) ; For other sources: –8 to 0: Presets the volume adjustment
level of each source. (Before adjustment, select the source you want to adjust.)
SOUND RECNSTR ON: Creates realistic sound by compensating the high-frequency components and
(Sound reconstruction) restoring the rise-time of the waveform that are lost in audio data compression. ;
OFF: Cancels.
• [SUB-W LEVEL]/ [SUBWOOFER SET]/ [LPF SUBWOOFER]/ [SUB-W PHASE] is selectable only if
[SWITCH PREOUT] is set to [SUB-W]. ( 4)
• [SUB-W LEVEL]/ [LPF SUBWOOFER]/ [SUB-W PHASE] is selectable only if [SUBWOOFER SET] is set
to [ON].

DISPLAY SETTINGS

1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [DISPLAY], then press
the knob.
3 Turn the volume knob to make a selection (see the
following table), then press the knob.
4 Repeat step 3 until the desired item is selected or
activated.
5 Press and hold to exit.
To return to the previous setting item, press
DIMMER ON: Dims the display illumination. ; OFF: Cancels.
BRIGHTNESS 0 — 31: Selects your preferred brightness level for
display illumination.
TEXT SCROLL AUTO/ ONCE: Selects whether to scroll the display
information automatically, or scroll only once. ;
OFF: Cancels.
.
Default: XX
17
ENGLISH