Operation - Bunn AutoPod Installation & Operating Manual

COFFEE BREWING
1. Place cup under brew chamber FIG 8-1. (Slide booster out for small cups) FIG 8-3.
2. Press the OPEN/CLOSE switch to open pod door FIG 8-2.
3. Press fresh pod firmly down into pod holder FIG 8-3.
4. Press the OPEN/CLOSE switch to close pod door FIG 8-2.
5. Press the desired brew switch.
6. Once the brew cycle is finished, display will read "BREWING COMPLETE", remove cup after display returns
to main screen.
FIG 8-1
FIG 8-2

OPERATION

HOT WATER DISPENSING
1. Place cup under brew chamber FIG 8-1. (Slide booster
out for small cups) FIG 8-3.
2. Press and hold the HOT WATER switch to fill. FIG
8-4 NOTE: Maximum of 10 oz.
POD INSERTED
Page 7
FIG 8-4
BOOSTER
FIG 8-3
41167.1 041410