Dust/Chip Extraction; Starting Operation - Bosch 22-180 LVI Original Instructions Manual

OBJ_BUCH-429-005.book Page 30 Wednesday, June 4, 2008 11:55 AM
30 | English
max.
[mm] [mm]
D b
d
180 8 22.2
230 8 22.2
D
b
180
D
–
230
d
100 30 M 14
b
D
Rotating the Main Handle
(GWS 24-180 LVI/GWS 24-230 LVI)
Before any work on the machine itself, pull
the mains plug.
The main handle 24 can be rotated with respect
to the machine housing toward the left or right
in steps of 90°. In this manner, the On/Off
switch can be brought into a more convenient
position for special working situations, e.g., for
cutting operations using the cutting guide with
dust extraction protection guard 21/cut off
stand or for left-handed persons.
Press the handle unlocking button 25 in the di-
rection of the arrow and at the same time turn
the main handle 24 to the requested position
until it latches.
1 609 929 L56 | (4.6.08)

Dust/Chip Extraction

d [rpm] [m/s]
8500 80
6500 80
8500 80
–
6500 80
8500 45
Operation
24

Starting Operation

25
When operating the machine with power from
mobile generators that do not have sufficient re-
serve capacity or are not equipped with suitable
voltage control with starting current amplifica-
tion, loss of performance or untypical behavior
can occur upon switching on.
Please observe the suitability of the power gen-
erator being used, particularly with regard to
the mains voltage and frequency.
Switching On and Off
To start the power tool, press the On/Off switch
3 forward and then down.
To lock-on the pressed On/Off switch 3, push
the On/Off switch 3 further forward.
Dusts from materials such as lead-containing
coatings, some wood types, minerals and
metal can be harmful to one's health. Touch-
ing or breathing-in the dusts can cause aller-
gic reactions and/or lead to respiratory infec-
tions of the user or bystanders.
Certain dusts, such as oak or beech dust, are
considered as carcinogenic, especially in
connection with wood-treatment additives
(chromate, wood preservative). Materials
containing asbestos may only be worked by
specialists.
– Use dust extraction whenever possible.
– Provide for good ventilation of the work-
ing place.
– It is recommended to wear a P2 filter-
class respirator.
Observe the relevant regulations in your
country for the materials to be worked.
Observe correct mains voltage! The voltage
of the power source must agree with the
voltage specified on the nameplate of the
machine. Power tools marked with 230 V
can also be operated with 220 V.
Bosch Power Tools