Health And Safety Recommendations; Rf Exposure Guidelines; Power Supply - Motorola AP-7131N-FGR Installation Manual

Regulatory Compliance 47

Health and Safety Recommendations

Warnings for the use of Wireless Devices
Please observe all warning notices with regard to the usage of wireless devices.
Potentially Hazardous Atmospheres
You are reminded of the need to observe restrictions on the use of radio devices in fuel depots,
chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or
metal powders).
Safety in Hospitals
Wireless devices transmit radio frequency energy and may affect medical electrical equipment.
When installed adjacent to other equipment, it is advised to verify that the adjacent equipment is not
adversely affected.

RF Exposure Guidelines

Safety Information
The device complies with Internationally recognized standards covering human exposure to
electromagnetic fields from radio devices.
Reducing RF Exposure—Use Properly
Only operate the device in accordance with the instructions supplied.
Remote and Standalone Antenna Configurations
To comply with FCC RF exposure requirements, antennas that are mounted externally at remote
locations or operating near users at stand-alone desktop of similar configurations must operate with
a minimum separation distance of 20 cm from all persons.

Power Supply

Use only a Motorola Solutions approved power supply output rated at 48Vdc and minimum 0.75A. The
power supply shall be Listed to UL/CSA 60950-1; and certified to IEC60950-1 and EN60950-1 with
SELV outputs.