Brakes - BMW R 1200 ST User Manual

Hide thumbs Also See for R 1200 ST:
Table of Contents

Advertisement

Topping up engine oil
If the oil level is below the MIN
mark:
• Using the tool from the tool-
kit, remove the filler plug.
• Top up the engine oil.
• Using the tool from the tool-
kit, hand-tighten the filler
plug.
To prevent damage to
the engine, do not ex-
ceed the maximum oil level.c
The red general warning
light in conjunction with
the engine oil pressure warn-
ing indicate the lack of or in-
sufficient oil pressure in the lu-
bricating oil circuit. They in no
way fulfill the function of an oil
level sensor.
When the oil pressure has built
up 1 to 2 seconds after start-
ing the engine, the engine oil-
pressure warning light
(
25) and the red general
b
warning light (
27) must go
b
out.c

Brakes

A properly functioning brake
system is a basic requirement
for the road safety of your
motorcycle.
Incorrect working prac-
tices endanger the reli-
ability of the brakes. Have all
work on the brake system car-
ried out by a specialist work-
shop, preferably an authorized
BMW motorcycle retailer.c
Do not ride the motorcycle if
you have any doubts about the
dependability of the brake sys-
tem. In this case:
• Have the brake system
checked by a specialist
workshop, preferably an
authorized BMW motorcycle
retailer.
6
91

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents