BMW R 1200 ST User Manual page 27

Hide thumbs Also See for R 1200 ST:
Table of Contents

Advertisement

You can continue to ride, but
bear in mind that the usual
engine output is not available.
• Have the fault rectified as
soon as possible by a spe-
cialist workshop, preferably
an authorized BMW motor-
cycle retailer.
Engine oil pressure
General warning light
lights up red.
Engine oil pressure sym-
bol is displayed.
Insufficient engine oil pressure.
The "engine oil pressure"
warning indicates that there is
no oil pressure or that the oil
pressure in the lubricating oil
circuit is too low; under no cir-
cumstances is it to be
regarded as fulfilling the func-
tion of an oil gauge. The warn-
ing must disappear when oil
pressure builds up 1 to 2 sec-
onds after the engine starts.
If the "engine oil pressure"
warning is displayed while the
motorcycle is being ridden,
take account of the traffic situ-
ation and:
• Disengage the gear.
• Operate the emergency ON/
OFF switch.
• Bring the motorcycle safely
to a halt.
• Check the engine oil level
(
90).
b
There are other engine-
related problems besides
a low engine-oil level that can
trigger the "engine-oil pres-
sure" warning. Continuing to
ride in these cases can cause
engine damage.
If the "engine oil pressure"
warning is issued, do not con-
tinue to ride if a check shows
that the engine oil level is
correct.c
• Have the fault rectified by a
specialist workshop, prefer-
ably an authorized
BMW motorcycle retailer.
Battery charge current
General warning light
lights up red.
Battery charge current
symbol is displayed.
The battery is no longer being
charged. You can continue to
ride only until the battery is
discharged.
2
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents