BMW R 1200 ST User Manual page 110

Installation is the reverse of the
6
removal procedure.
• Use a clean, dry cloth to hold
108
the new bulb.
Replacing brake light and
rear light bulbs
If it is not standing firmly,
the motorcycle could
topple in the course of the op-
erations described below.
Make sure that the motorcycle
is steady on its stand.c
• Switch off the ignition.
• Remove the rear seat (
• Remove screws 1 on left and
right.
• Pull off the bulb housing 2
toward the rear.
43).
b
• Turn bulb holder 3 counter-
clockwise to remove it from
the bulb housing.
• Press the bulb into its socket
and turn it counter-clock-
wise to remove.
Installation is the reverse of the
removal procedure.
• Use a clean, dry cloth to hold
the new bulb.
Replacing front turn
indicator bulb
If it is not standing firmly,
the motorcycle could
topple in the course of the op-
erations described below.
Make sure that the motorcycle
is steady on its stand.c
• Switch off the ignition.