Trimming Scenes - Canon Legria HF R47 Instruction Manual

Trimming Scenes

You can trim MP4 scenes by removing everything up to a certain point
or everything after a certain point. By doing so, you leave only memo-
rable moments to keep for posterity.
Operating modes:
1 Play back the desired scene (A 49).
2 Touch the screen and then touch [Ý] to pause the playback.
3 Open the screen for trimming scenes.
[Edit]
4 Bring the scene to a precise point, if necessary.
• The point at which is movie will be trimmed is indicated by the
marker.
• Playback controls will appear on the screen (A 51). Use any special
playback modes (fast playback, frame reverse/advance) as
necessary to locate the desired point.
5 Trim the scene.
[Trim]
marker
over the existing scene
Touch [Stop] to interrupt the operation while it is in progress.
NOTES
• You may not be able to trim the following types of scenes.
- :/9/8 Scenes copied from the built-in memory to an
SDXC memory card.
- Scenes recorded or copied using another device.
Downloaded From VideoCamera-Manual.com Manuals
SCN
>
[Trim]
>
Select whether to trim before or after the
>
Select whether to save as a new scene or write
Advanced Playback and Editing
97