Canon Legria HF R47 Instruction Manual page 162

:/9/8 Cannot access the built-in memory
- There is a problem with the built-in memory. Contact a Canon Service Center.
Cannot communicate with the battery pack. Continue using this battery pack?
- You attached a battery pack that is not recommended by Canon for use with this camcorder.
- If you are using a battery pack recommended by Canon for use with this camcorder, there
may be a problem with the camcorder or battery pack. Consult a Canon Service Center.
Cannot convert scenes recorded at 50P
- Scenes that were recorded at 50P cannot be converted to MP4.
Cannot convert the scene
- You cannot convert scenes recorded using another device.
Cannot copy
- The total size of the scenes you selected to copy exceeds the available space on the memory
card. Delete some recordings on the memory card (A 55, 57) or reduce the number of
scenes to copy.
- The memory card already contains the maximum number of AVCHD scenes (3,999 scenes).
Delete some scenes (A 55) to free some space.
Cannot divide the scene
- The scene could not be divided because the camcorder's internal scene management data log
is full. Delete some scenes (A 55) and photos (A 57) and try dividing the scene again.
Cannot divide the scene. Initialize only using the camcorder.
- The scene could not be divided because the camcorder's internal scene management data log
is full. Delete some scenes (A 55) and photos (A 57) and try dividing the scene again.
Cannot load canvas
- The canvas file that was saved on the memory is corrupted.
- Canvas data cannot be read from canvas files created using other devices and then trans-
ferred to a memory card connected to the computer.
Cannot play back
- You may not be able to play back scenes recorded or edited using another device.
- There is a problem with the memory. If this message appears often without apparent reason,
contact a Canon Service Center.
:/9/8 Cannot play back Cannot access the built-in memory
- There is a problem with the built-in memory. Save your recordings (A 108) and initialize the
built-in memory using the [Complete Initialization] option (A 31). If the problem persists,
contact a Canon Service Center.
Cannot play back Check the memory card
- There is a problem with the memory card. Save your recordings (A 108) and initialize the
memory card using the [Complete Initialization] option (A 31). If the problem persists, use a
different memory card.
Downloaded From VideoCamera-Manual.com Manuals
162
Additional Information