Advanced Image Stabilization
The image stabilizer reduces camcorder blur (blur due to the cam-
corder moving) so you can get nice, stable shots. Select the image sta-
bilization mode according to the shooting conditions.
Operating modes:
>
[
>
Desired IS mode
Options
( Default value)
[
Dynamic]
shake, such as when shooting while walking, and is more effec-
tive as the zoom approaches full wide angle.
[
Standard]
shake, such as when shooting while remaining stationary, and is
suitable for shooting natural-looking scenes.
[j Off]
tripod.
Powered IS
You can use Powered IS to make the image stabilization even more
powerful. Holding the LCD panel with your left hand will add to the
stability of the shot.
>
[È Powered IS]
• Repeat, selecting [OFF], to turn off Powered IS.
NOTES
• If the degree of camcorder shake is too high, the image stabilizer may
not be able to fully compensate.
Downloaded From VideoCamera-Manual.com Manuals
74
Advanced Shooting
SCN
Other Settings]
>
Compensates for a higher degree of camcorder
Compensates for a lower degree of camcorder
Use this setting when the camcorder is mounted on a
>
p
>
[X]
>
>
[ON]
[X]
[Image Stabilizer]