User Preferences; Set Default Parameter; Parameter Scanning - Motorola Symbol DS6608 Product Reference Manual

User Preferences 4-5

User Preferences

Set Default Parameter

Scan this bar code to return all parameters to the default values listed in Table A-1 on page A-3.
*Set All Defaults

Parameter Scanning

Parameter # ECh
To disable decoding of parameter bar codes, scan the Disable Parameter Scanning bar code below. Note that the Set Defaults
parameter bar code can still be decoded. To enable decoding of parameter bar codes, either scan Enable Parameter Scanning or
Set All Defaults.
*Enable Parameter Scanning
(01h)
Disable Parameter Scanning
(00h)