Installing The Optional Chef's Bowl; Using The 3-In-1 Feed Tube - KitchenAid KFP1333 Instructions For Use Manual

Setting Up Your Food Processor
Installing the Optional
Chef's Bowl
(not included)
The optional Chef's Bowl can only be used
with the slicing or shredding discs. It cannot
be used with the multipurpose blade.
1. Place the Chef's Bowl inside the work
bowl, sliding it down over the power shaft.
Rotate the Chef's Bowl until it drops into
place. Once in place, it cannot be rotated.
2. Install the desired slicing or shredding disc.
3. Install the work bowl cover, being sure it
locks into place.
To remove the Chef's Bowl after processing,
JUDVS E\ WKH ÀQJHU JULSV DORQJ WKH WRS HGJH
of the bowl and lift straight up and out.
Finger grips

Using the 3-in-1 Feed Tube

The 3-in-1 feed
tube features
a 3-piece food
pusher. Use the
entire food pusher
to process large
items, or use the
inner portions to
create medium-
sized or small feed
tubes to process
smaller items.
To slice or shred
small items, insert
the 3-piece food
pusher into the feed
tube, then lift out
the small pusher to
remove. Use the
small feed tube and
pusher to process small or slender items,
like single carrots or celery stalks. When not
using the small feed tube, be sure to lock the
small pusher into place.
To slowly drizzle oil or other liquid
LQJUHGLHQWV LQWR WKH ZRUN ERZO MXVW ÀOO WKH
small pusher with the desired amount of
liquid. A small hole in the bottom of the
pusher will drizzle the liquid ingredient
at a constant rate.
15