Installing The Mini-Bowl And Mini-Blade - KitchenAid KFP1133 Instructions Manual

ASSEMBLING THE FOOD PROCESSOR

INSTALLING THE MINI-BOWL AND MINI-BLADE

Place the mini-bowl inside the work
bowl over the power shaft. Rotate
1
the mini-bowl until the tabs on the
top edge of the bowl drop into the
indents on the top of the work bowl.
Install the work bowl cover, being sure
3
it locks into place.
W10679565B.indb 11
Insert the drive adapter into the
mini-blade, and place on the power
shaft. It may be necessary to rotate
2
the blade until it falls into place. Push
down firmly on the top of the blade
to lock into place.
To remove the mini-bowl after
processing, remove the mini-blade by
pulling straight up on the cap. Then
4
lift the bowl straight up and out, using
the two finger grips located along the
top edge of the bowl.
ASSEMBLING THE FOOD PROCESSOR | 11
3/22/2019 4:15:57 PM