Http; Enabling Http At The Control Panel; Configuring Http Settings In Centreware Internet Services - Xerox WorkCentre 4265 System Administrator Manual

HTTP

Hypertext Transfer Protocol (HTTP) is a request-response standard protocol between clients and servers.
Clients that make HTTP requests are called User Agents (UAs). Servers that respond to these requests for
resources, such as HTML pages, are called Origin Servers. There can be any number of intermediaries,
such as tunnels, proxies, or gateways between User Agents and Origin Servers.

Enabling HTTP at the Control Panel

1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
Touch Network Settings > Advanced Settings.
2.
3. Touch HTTP Setting.
Touch Enable, then touch OK.
4.

Configuring HTTP Settings in CentreWare Internet Services

In CentreWare Internet Services, click Properties > Connectivity > Protocols.
1.
2. Click HTTP.
3. To enable the protocol, for Protocol, select Enabled.
4. For Keep Alive Timeout, enter the time that the printer waits for a response from a connected user
before it terminates the connection. Increasing the Keep Alive Timeout can cause slow connections.
5. Change the Port Number as needed.
Note: If a machine digital certificate is configured, you can edit the following fields.
6. For HTTP Security Mode, select an SSL security option.
To allow connections to the device using SSL v3 only, for Require SSL v3, select Enable.
7.
8. Click Apply.
® ®
Xerox WorkCentre 4265 Multifunction Printer
System Administrator Guide
Network Connectivity
37