Network Connectivity
6.
To configure LDAP Bind, perform the following steps.
a.
To specify the Bind Method to connect to the directory server, select an option.
Simple: This method uses a DN-password combination to authenticate to the directory
•
server.
Anonymous: This method does not require authentication to connect to the directory
•
server.
b.
Enter the Login Name.
c.
Type the password, then type the password again to verify.
To save the new password, click Select to save new password.
d.
To append a base DN to the bind, for Append Base DN, select Enable.
e.
f.
For Root to append, enter the root directory of the database.
To configure Secure LDAP Connection, for Secure LDAP via SSL, select Enable.
7.
8.
To configure LDAP Mappings, for each field, select an option.
9.
To configure Search Criteria, perform the following steps.
a.
For Search Name Order, select an option.
b.
Under Maximum Number of Search Results, to define the maximum number of addresses
returned that match search criteria, type a number from 5–100.
c.
Select the amount of time that the printer can search before it times out.
To enable LDAP Referrals, select Enable.
d.
10. To append an email domain to login credentials, click Enable.
11. For Domain Name, type the domain name for your server.
12. Click Save.
®
34
Xerox
WorkCentre
System Administrator Guide
®
4265 Multifunction Printer