Epson TM-T88V-i Technical Reference Manual page 97

3
Hold down the Feed button for 1 second or more to move to mode
selection.
The mode selection guidance is printed and Paper LED flashes.
4
Press the Feed button for less than 1 second three times and then hold
down for more than 1 second to pr int the Receipt Enhancement
Information.
After the information is printed, the mode selection guidance is printed again.
Chapter 3
Mode Selection
Modes
0: Exit and Reboot Printer
1: NV Graphics Information
2: Receipt Enhancement Information
3: Customize Value Settings
4: or more: None
Select Modes by executing following
procedure.
step 1. Press the Feed button less
than 1 second as many times
as the selected mode number.
step 2. Press Feed button for 1
second or more.
Customize Value Settings
Modes
0: Exit
1: Print Current Settings
2: Print Density
3: Serial Interface Settings
4: Automatic Paper Reduction
5: Auto Paper Feed&Cut at cover close
6: Paper Width
8: Default Character
9: Embedded Font Replacement
10: Interface Selection
11: USB Interface Settings
12: Power Supply Output
13: Printing Speed
14: Other Settings
Select Modes by executing following
procedure.
step 1. Press the Feed button less
than 1second as many times
as the selected mode number.
step 2. Press Feed button for 1
second or more.
Application Development Information
3
97