To Use The Cutting Discs; Compact Chopper/Grinder; To Use Your Compact Chopper/Grinder; Mini Bowl And Knife - Kenwood FPM90 Instructions Manual

Hide thumbs Also See for FPM90:
Table of Contents

Advertisement

safety
Never remove the lid until the cutting disc has
G
completely stopped.
Handle the cutting discs with care - they are
G
extremely sharp.
Do not overfill the bowl – do not exceed the
G
maximum capacity level marked on the bowl.

to use the cutting discs

1 Fit the detachable drive shaft and bowl onto the power unit.
2 Holding by the centre grip, place the disc onto the drive shaft with
the appropriate side uppermost
3 Fit the lid.
4 Put the food in the feed tube.
Choose which size feed tube you want to use. The pusher
contains a smaller feed tube for processing individual items or
thin food items.
To use the small feed tube – first put the large pusher inside the
feed tube.
To use the wide feed tube – fit the small pusher into the wide
pusher and turn clockwise to lock in place.
Do not fill the feed tube above the maximum level as the
processor will not operate unless the wide feed tube pusher is
fitted correctly.
5 Switch on and push down evenly with the pusher - never put
your fingers in the feed tube.
hints
Use fresh ingredients
G
G
Don't cut food too small. Fill the width of the feed tube fairly full.
This prevents the food from slipping sideways during processing.
Alternatively use the small feed tube.
When using the Julienne disc, place ingredients horizontally.
G
G
When slicing or grating: food placed upright
shorter than food placed horizontally
Food placed upright comes out shorter than food placed
G
horizontal.
There will always be a small amount of waste on the disc or in
G
the bowl after processing.
dq

mini bowl and knife

Use the mini processor bowl to chop herbs and process small
quantities of ingredients e.g. meat, onion, nuts, mayonnaise,
vegetables, purées, sauces and baby food.
Do not overfill the bowl.
a mini blade
b mini bowl
to use the mini bowl and knife
1 Fit the detachable drive shaft and bowl onto the power unit.
2 Fit the mini bowl over the detachable drive shaft - ensure the cut
out sections align with the locating tabs
Note: The main bowl lid cannot be fitted if the mini bowl is not
located correctly.
3 Place the knife blade over the drive shaft
4 Add the ingredients to be processed.
5 Fit the lid and switch on.
bm
.
bn
comes out
bo
.
(if supplied)
bp
on the main bowl.
bq
.
safety
Never remove the lid until the knife blade has completely
G
stopped.
The knife blade is very sharp - always handle with care.
G
important
Do not process spices – they may damage the plastic.
G
Do not process hard food such as coffee beans, ice cubes or
G
chocolate – they may damage the blade.
hints
Herbs are best chopped when clean and dry.
G
Always add a little liquid when blending cooked ingredients to
G
make baby food.
Cut foods such as meat, bread, vegetables into cubes
G
approximately 1-2 cm (
When making mayonnaise add the oil down the feed tube.
G
dr

compact chopper/grinder

Use the compact chopper/grinder for processing dry ingredients
such as nuts, coffee beans and it is also suitable for processing
a range of spices such as: -
Black peppercorns, cardamom seeds, cumin seeds, coriander
seeds, fennel seeds, fresh ginger root, fresh chillies and whole
cloves.
a sealing ring
b blade unit
c glass jar

to use your compact chopper/grinder

1 Put your ingredients into the jar. Fill it no more than half full.
2 Fit the sealing ring to the blade unit.
3 Hold the underside of the blade unit and insert the blades into
the jar – turn anti-clockwise to lock
4 Place the compact chopper/grinder onto the power unit and turn
bs
clockwise to lock
5 Use the Auto button, or select a speed (refer to the
recommended speed chart).
safety
Never fit the blade unit to your food processor without the jar
G
fitted.
Never unscrew the jar while the compact chopper/grinder is
G
fitted to your appliance.
Do not touch the sharp blades – Keep the blade unit away from
G
children.
Never remove the compact chopper/grinder until the blades
G
have completely stopped.
G
To ensure the long life of your compact chopper/grinder, do not
run it continuously for longer than 60 seconds. Switch off as
soon as you have got the right consistency.
The appliance will not work if the compact chopper/grinder is
G
incorrectly fitted.
Do not process turmeric root in the compact chopper/grinder as
G
it is too hard and may damage the blades.
hints
For optimum performance when processing spices we
G
recommend that you do not process more than 100g at a time in
the compact chopper/grinder.
Whole spices retain their flavour for a much longer time than
G
ground spices so it is best to grind a small quantity fresh at a
time to retain the flavour.
12
1
3
in) before processing.
2
4
(if supplied)
br
.
.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fpm91

Table of Contents